Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search


Matlab Code for Inverse Filtering

Below is the matlab source code used to extract the main Helmholtz air mode from the guitar body impulse response in Figures 8.14 through 8.17:

        freq = 104.98;  % estimated peak frequency in Hz
        bw = 10;        % peak bandwidth estimate in Hz

        R = exp( - pi * bw / fs);            % pole radius
        z = R * exp(j * 2 * pi * freq / fs); % pole itself
        B = [1, -(z + conj(z)), z * conj(z)] % numerator
        r = 0.9;     % zero/pole factor (notch isolation)
        A = B .* (r .^ [0 : length(B)-1]);   % denominator

        residual = filter(B,A,bodyIR); % apply inverse filter


Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

[How to cite this work]  [Order a printed hardcopy]  [Comment on this page via email]

``Physical Audio Signal Processing'', by Julius O. Smith III, W3K Publishing, 2010, ISBN 978-0-9745607-2-4
Copyright © 2024-06-28 by Julius O. Smith III
Center for Computer Research in Music and Acoustics (CCRMA),   Stanford University
CCRMA