Suppose we wish to model a situation in which a mass of size kilograms is traveling with a constant velocity. This is an appropriate model for a piano hammer after its key has been pressed and before the hammer has reached the string.
Figure F.2 shows the ``wave digital mass'' derived previously. The derivation consisted of inserting an infinitesimal waveguideF.2 having (real) impedance , solving for the force-wave reflectance of the mass as seen from the waveguide, and then mapping it to the discrete time domain using the bilinear transform.
We now need to attach the other end of the transmission line to a ``force source'' which applies a force of zero newtons to the mass. In other words, we need to terminate the line in a way that corresponds to zero force.
Let the force-wave components entering and leaving the mass be denoted and , respectively (i.e., we are dropping the subscript `d' in Fig.F.2). The physical force associated with the mass is
The zero-force case is therefore obtained when . This is illustrated in Fig.F.10.
Figure F.10a (left portion) illustrates what we derived by physical reasoning, and as such, it is most appropriate as a physical model of the constant-velocity mass. However, for actual implementation, Fig.F.10b would be more typical in practice. This is because we can always negate the state variable if needed to convert it from to . It is very common to see final simplifications like this to maximize efficiency.
Note that Fig.F.10b can be interpreted physically as a wave digital spring displaced by a constant force .