Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search


Analytic Signals and Hilbert Transform Filters

A signal which has no negative-frequency components is called an analytic signal.4.13 Therefore, in continuous time, every analytic signal $ z(t)$ can be represented as

$\displaystyle z(t) = \frac{1}{2\pi}\int_0^{\infty} Z(\omega)e^{j\omega t}d\omega
$

where $ Z(\omega)$ is the complex coefficient (setting the amplitude and phase) of the positive-frequency complex sinusoid $ \exp(j\omega t)$ at frequency $ \omega$ .

Any real sinusoid $ A\cos(\omega t + \phi)$ may be converted to a positive-frequency complex sinusoid $ A\exp[j(\omega t +
\phi)]$ by simply generating a phase-quadrature component $ A\sin(\omega t + \phi)$ to serve as the ``imaginary part'':

$\displaystyle A e^{j(\omega t + \phi)} = A\cos(\omega t + \phi) + j A\sin(\omega t + \phi)
$

The phase-quadrature component can be generated from the in-phase component by a simple quarter-cycle time shift.4.14

For more complicated signals which are expressible as a sum of many sinusoids, a filter can be constructed which shifts each sinusoidal component by a quarter cycle. This is called a Hilbert transform filter. Let $ {\cal H}_t\{x\}$ denote the output at time $ t$ of the Hilbert-transform filter applied to the signal $ x$ . Ideally, this filter has magnitude $ 1$ at all frequencies and introduces a phase shift of $ -\pi/2$ at each positive frequency and $ +\pi/2$ at each negative frequency. When a real signal $ x(t)$ and its Hilbert transform $ y(t) =
{\cal H}_t\{x\}$ are used to form a new complex signal $ z(t) = x(t) + j y(t)$ , the signal $ z(t)$ is the (complex) analytic signal corresponding to the real signal $ x(t)$ . In other words, for any real signal $ x(t)$ , the corresponding analytic signal $ z(t)=x(t) + j {\cal H}_t\{x\}$ has the property that all ``negative frequencies'' of $ x(t)$ have been ``filtered out.''

To see how this works, recall that these phase shifts can be impressed on a complex sinusoid by multiplying it by $ \exp(\pm j\pi/2) = \pm j$ . Consider the positive and negative frequency components at the particular frequency $ \omega_0$ :

\begin{eqnarray*}
x_+(t) &\isdef & e^{j\omega_0 t} \\
x_-(t) &\isdef & e^{-j\omega_0 t}
\end{eqnarray*}

Now let's apply a $ -90$ degrees phase shift to the positive-frequency component, and a $ +90$ degrees phase shift to the negative-frequency component:

\begin{eqnarray*}
y_+(t) &=& e^{-j\pi/2} e^{j\omega_0 t} = -j e^{j\omega_0 t} \\
y_-(t) &=& e^{j\pi/2} e^{-j\omega_0 t} = j e^{-j\omega_0 t}
\end{eqnarray*}

Adding them together gives

\begin{eqnarray*}
z_+(t) &\isdef & x_+(t) + j y_+(t) = e^{j\omega_0 t} - j^2 e^{j\omega_0 t}
= 2 e^{j\omega_0 t} \\
z_-(t) &\isdef & x_-(t) + j y_-(t) = e^{-j\omega_0 t} + j^2 e^{-j\omega_0 t} = 0
\end{eqnarray*}

and sure enough, the negative frequency component is filtered out. (There is also a gain of 2 at positive frequencies.)

For a concrete example, let's start with the real sinusoid

$\displaystyle x(t)=2\cos(\omega_0 t) = e^{j\omega_0 t} + e^{-j\omega_0 t}.
$

Applying the ideal phase shifts, the Hilbert transform is

\begin{eqnarray*}
y(t) &=& e^{j\omega_0 t-j\pi/2} + e^{-j\omega_0 t + j\pi/2}\\
&=& -je^{j\omega_0 t} + je^{-j\omega_0 t} = 2\sin(\omega_0 t).
\end{eqnarray*}

The analytic signal is then

$\displaystyle z(t) = x(t) + j y(t) = 2\cos(\omega_0 t) + j 2\sin(\omega_0 t) = 2 e^{j\omega_0 t},
$

by Euler's identity. Thus, in the sum $ x(t) + j y(t)$ , the negative-frequency components of $ x(t)$ and $ jy(t)$ cancel out, leaving only the positive-frequency component. This happens for any real signal $ x(t)$ , not just for sinusoids as in our example.

Figure 4.16: Creation of the analytic signal $ z(t)=e^{j\omega _0 t}$ from the real sinusoid $ x(t) = \cos (\omega _0 t)$ and the derived phase-quadrature sinusoid $ y(t) = \sin (\omega _0 t)$ , viewed in the frequency domain. a) Spectrum of $ x$ . b) Spectrum of $ y$ . c) Spectrum of $ j y$ . d) Spectrum of $ z = x + jy$ .
\includegraphics[width=2.8in]{eps/sineFD}

Figure 4.16 illustrates what is going on in the frequency domain. At the top is a graph of the spectrum of the sinusoid $ \cos(\omega_0
t)$ consisting of impulses at frequencies $ \omega=\pm\omega_0$ and zero at all other frequencies (since $ \cos(\omega_0 t) =
(1/2)\exp(j\omega_0 t) + (1/2)\exp(-j\omega_0 t)$ ). Each impulse amplitude is equal to $ 1/2$ . (The amplitude of an impulse is its algebraic area.) Similarly, since $ \sin(\omega_0 t) =
(1/2j)\exp(j\omega_0 t) - (1/2j)\exp(-j\omega_0 t) = -(j/2)
\exp(j\omega_0 t) + (j/2)\exp(-j\omega_0 t)$ , the spectrum of $ \sin(\omega_0 t)$ is an impulse of amplitude $ -j/2$ at $ \omega=\omega_0$ and amplitude $ +j/2$ at $ \omega=-\omega_0$ . Multiplying $ y(t)$ by $ j$ results in $ j\sin(\omega_0 t) =
(1/2)\exp(j\omega_0 t) - (1/2)\exp(-j\omega_0 t)$ which is shown in the third plot, Fig.4.16c. Finally, adding together the first and third plots, corresponding to $ z(t) = x(t) + j y(t)$ , we see that the two positive-frequency impulses add in phase to give a unit impulse (corresponding to $ \exp(j\omega_0 t)$ ), and at frequency $ -\omega_0$ , the two impulses, having opposite sign, cancel in the sum, thus creating an analytic signal $ z$ , as shown in Fig.4.16d. This sequence of operations illustrates how the negative-frequency component $ \exp(-j\omega_0 t)$ gets filtered out by summing $ \cos(\omega_0
t)$ with $ j\sin(\omega_0
t)$ to produce the analytic signal $ \exp(j\omega_0 t)$ corresponding to the real signal $ \cos(\omega_0
t)$ .

As a final example (and application), let $ x(t) = A(t)\cos(\omega t)$ , where $ A(t)$ is a slowly varying amplitude envelope (slow compared with $ \omega$ ). This is an example of amplitude modulation applied to a sinusoid at ``carrier frequency'' $ \omega$ (which is where you tune your AM radio). The Hilbert transform is very close to $ y(t)\approx A(t)\sin(\omega t)$ (if $ A(t)$ were constant, this would be exact), and the analytic signal is $ z(t)\approx A(t)e^{j\omega t}$ . Note that AM demodulation4.15is now nothing more than the absolute value. I.e., $ A(t) =
\left\vert z(t)\right\vert$ . Due to this simplicity, Hilbert transforms are sometimes used in making amplitude envelope followers for narrowband signals (i.e., signals with all energy centered about a single ``carrier'' frequency). AM demodulation is one application of a narrowband envelope follower.


Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

[How to cite this work]  [Order a printed hardcopy]  [Comment on this page via email]

``Mathematics of the Discrete Fourier Transform (DFT), with Audio Applications --- Second Edition'', by Julius O. Smith III, W3K Publishing, 2007, ISBN 978-0-9745607-4-8
Copyright © 2024-02-20 by Julius O. Smith III
Center for Computer Research in Music and Acoustics (CCRMA),   Stanford University
CCRMA