Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

Linear prediction

Another well known method for converting the least-damped modes into parametric form is Linear Predictive Coding (LP) followed by polynomial factorization to obtain resonator poles. LP is particularly good at fitting spectral peaks due to the nature of the error criterion it minimizes [432]. The poles closest to the unit circle in the $ z$ plane can be chosen for the ``ringy'' part of the resonator. It is well known that when using techniques like LP to model spectral peaks for extraction, orders substantially higher than twice the number of spectral peaks should be used. The extra degrees of freedom in the LP fit give more poles for modeling spectral detail other than the peaks, allowing the poles modeling the peaks to fit them with less distraction. On the other hand, if the order chosen is too high, sometimes more than two poles will home in on the same peak. In some cases, this may be appropriate since the body resonances are not necessary resolvable so as to separate the peaks, especially at high frequencies.


Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

[How to cite this work]  [Order a printed hardcopy]  [Comment on this page via email]

``Physical Audio Signal Processing'', by Julius O. Smith III, W3K Publishing, 2010, ISBN 978-0-9745607-2-4
Copyright © 2024-06-28 by Julius O. Smith III
Center for Computer Research in Music and Acoustics (CCRMA),   Stanford University
CCRMA