Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search


Force Wave Mass-String Model

The velocity transmittance is readily converted to a force transmittance using the Ohm's-law relations:

$\displaystyle \hat{\tau}_f(s) \isdefs \frac{F^{+}_2}{F^{+}_1} = \frac{RV^{+}_2}{RV^{+}_1} = \hat{\tau}_v(s)
$

Calculating it for the other direction as a check gives

$\displaystyle \frac{F^{-}_1}{F^{-}_2} = \frac{-RV^{+}_1}{-RV^{+}_2} = \hat{\tau}_v(s).
$

Thus, while the reflectance of the mass toggles sign when changing from force to velocity waves, the transmittance of the mass is the same in both cases. We therefore have the force-wave scattering junction shown in Fig.9.19.

Figure 9.19: Force-wave scattering junction representing a mass $ m$ (impedance $ ms$ ) attached to an ideal string having wave impedance $ R$ .
\includegraphics[width=0.8\twidth]{eps/massstringdwmformforce}

Checking as before, we see that $ m\to\infty$ corresponds to $ \hat{\tau}_v(s)\to 0$ , which means no force is transmitted through an infinite mass, which is reasonable. As $ m\to0$ , the force transmittance becomes 1 and the mass has no effect, as desired.


Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

[How to cite this work]  [Order a printed hardcopy]  [Comment on this page via email]

``Physical Audio Signal Processing'', by Julius O. Smith III, W3K Publishing, 2010, ISBN 978-0-9745607-2-4
Copyright © 2024-06-28 by Julius O. Smith III
Center for Computer Research in Music and Acoustics (CCRMA),   Stanford University
CCRMA