Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

Young's Modulus as a Spring Constant

Recall (§B.1.3) that Hooke's Law defines a spring constant $ k$ as the applied force $ F$ divided by the spring displacement $ x$ , or $ F = k x$ . An elastic solid can be viewed as a bundle of ideal springs. Consider, for example, an ideal bar (a rectangular solid in which one dimension, usually its longest, is designated its length $ L$ ), and consider compression by $ \Delta L$ along the length dimension. The length of each spring in the bundle is the length of the bar, so that each spring constant $ k$ must be inversely proportional to $ L$ ; in particular, each doubling of length $ L$ doubles the length of each ``spring'' in the bundle, and therefore halves its stiffness. As a result, it is useful to normalize displacement $ \Delta L$ by length $ L$ and use relative displacement $ \Delta L/L$ . We need displacement per unit length because we have a constant spring compliance per unit length.

The number of springs in parallel is proportional to the cross-sectional area $ S$ of the bar. Therefore, the force applied to each spring is proportional to the total applied force $ F$ divided by the cross-sectional area $ S$ . Thus, Hooke's law for each spring in the bundle can be written

$\displaystyle \frac{F}{S} = Y \frac{\Delta L}{L}

where $ Y$ is Young's modulus.

We may say that Young's modulus is the Hooke's-law spring constant for the spring made from a specifically cut section of the solid material, cut to length 1 and cross-sectional area 1. The shape of the cross-sectional area does not matter since all displacement is assumed to be longitudinal in this model.

Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

[How to cite this work]  [Order a printed hardcopy]  [Comment on this page via email]

``Physical Audio Signal Processing'', by Julius O. Smith III, W3K Publishing, 2010, ISBN 978-0-9745607-2-4
Copyright © 2023-08-20 by Julius O. Smith III
Center for Computer Research in Music and Acoustics (CCRMA),   Stanford University