Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

Force-Pulse Synthesis

Figure 9.32: Creating a single hammer-string interaction force-pulse as the impulse response of a filter. The filter depends on the hammer-string collision velocity $ v_c$ , but it is LTI while $ v_c$ is fixed.

The creation of a single force-pulse for a given hammer-string collision velocity $ v_c$ (a specific ``dynamic level'') is shown in Fig.9.32. The filter input is an impulse, and the output is the desired hammer-string force pulse. As $ v_c$ increases, the output pulse increases in amplitude and decreases in width, which means the filter is nonlinear. In other words, the force pulse gets ``brighter'' as its amplitude (dynamic level) increases. In a real piano, this brightness increase is caused by the nonlinear felt-compression in the piano hammer. Recall from §9.3.2 that piano-hammer felt is typically modeled as a nonlinear spring described by $ f(x)=k\,x^p$ , where $ x$ is felt compression. Here, the brightness is increased by shrinking the duration of the filter impulse response as $ v_c$ increases. The key property enabling commuted synthesis is that, when $ v_c$ is constant, the filter operates as a normal LTI filter. In this way, the entire piano has been ``linearized'' with respect to a given collision velocity $ v_c$ .

Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

[How to cite this work]  [Order a printed hardcopy]  [Comment on this page via email]

``Physical Audio Signal Processing'', by Julius O. Smith III, W3K Publishing, 2010, ISBN 978-0-9745607-2-4
Copyright © 2024-06-28 by Julius O. Smith III
Center for Computer Research in Music and Acoustics (CCRMA),   Stanford University