DB for Display

In practical signal processing, it is common to choose the *maximum
signal magnitude* as the reference amplitude. That is, we normalize the
signal so that the maximum amplitude is defined as 1, or 0 dB. This
convention is also used by ``sound level meters'' in audio recording. When
displaying magnitude spectra, the highest spectral peak is often normalized
to 0 dB. We can then easily read off lower peaks as so many dB below the
highest peak.

Figure F.1b shows a plot of the Fast Fourier Transform (FFT) of ten periods of a ``Kaiser-windowed'' sinusoid at Hz. (FFT windows are introduced in §8.1.4. The window is used to taper a finite-duration section of the signal.) Note that the peak dB magnitude has been normalized to zero, and that the plot has been clipped at -100 dB.

Below is the Matlab code for producing Fig.F.1. Note that it contains several elements (windows, zero padding, spectral interpolation) that we will not cover until later. They are included here as ``forward references'' in order to keep the example realistic and practical, and to give you an idea of ``how far we have to go'' before we know how to do practical spectrum analysis. Otherwise, the example just illustrates plotting spectra on an arbitrary dB scale between convenient limits.

% Practical display of the fft of a synthesized sinusoid fs = 44100; % Sampling rate f = 440; % Sinusoidal frequency = A-440 nper = 10; % Number of periods to synthesize dur = nper/f; % Duration in seconds T = 1/fs; % Sampling period t = 0:T:dur; % Discrete-time axis in seconds L = length(t) % Number of samples to synthesize ZP = 5; % Zero padding factor N = 2^(nextpow2(L*ZP)) % FFT size (power of 2) x = cos(2*pi*f*t); % A sinusoid at A-440 ("row vector") w = kaiser(L,8); % An "FFT window" xw = x .* w'; % Need to transpose w to get a row sound(xw,fs); % Might as well listen to it xzp = [xw,zeros(1,N-L)];% Zero-padded FFT input buffer X = fft(xzp); % Interpolated spectrum of xw Xmag = abs(X); % Spectral magnitude Xdb = 20*log10(Xmag); % Spectral magnitude in dB XdbMax = max(Xdb); % Peak dB magnitude Xdbn = Xdb - XdbMax; % Normalize to 0dB peak dBmin = -100; % Don't show anything lower than this Xdbp = max(Xdbn,dBmin); % Normalized, clipped, dB mag spec fmaxp = 2*f; % Upper frequency limit of plot, Hz kmaxp = fmaxp*N/fs; % Upper frequency limit of plot, bins fp = fs*[0:kmaxp]/N; % Frequency axis in Hz % Ok, plot it already! subplot(2,1,1); plot(1000*t,xw); xlabel('Time (ms)'); ylabel('Amplitude'); title(sprintf(['a) %d Periods of a %3.0f Hz Sinusoid, ', 'Kaiser Windowed'],nper,f)R); subplot(2,1,2); plot(fp,Xdbp(1:kmaxp+1)); grid; % Plot a dashed line where the peak should be: hold on; plot([440 440],[dBmin,0],'--'); hold off; xlabel('Frequency (Hz)'); ylabel('Magnitude (dB)'); title(sprintf(['b) Interpolated FFT of %d Periods of ',... '%3.0f Hz Sinusoid'],nper,f));

The following more compact Matlab produces essentially the same plot, but without the nice physical units on the horizontal axes:

x = cos([0:2*pi/20:10*2*pi]); % 10 periods, 20 samples/cycle L = length(x); xw = x' .* kaiser(L,8); N = 2^nextpow2(L*5); X = fft([xw',zeros(1,N-L)]); subplot(2,1,1); plot(xw); xlabel('Time (samples)'); ylabel('Amplitude'); title('a) 10 Periods of a Kaiser-Windowed Sinusoid'); subplot(2,1,2); kmaxp = 2*10*5; Xl = 20*log10(abs(X(1:kmaxp+1))); plot([10*5+1,10*5+1],[-100,0],[0:kmaxp],max(Xl-max(Xl),-100)); grid; xlabel('Frequency (Bins)'); ylabel('Magnitude (dB)'); title('b) Interpolated FFT of 10 Periods of Sinusoid');

[How to cite this work] [Order a printed hardcopy] [Comment on this page via email]

Copyright ©

Center for Computer Research in Music and Acoustics (CCRMA), Stanford University