Reference   Language | Libraries | Comparison | Changes

delayMicroseconds()

Description

Pauses the program for the amount of time (in microseconds) specified as parameter. There are a thousand microseconds in a millisecond, and a million microseconds in a second.

Currently, the largest value that will produce an accurate delay is 16383. This could change in future Arduino releases. For delays longer than a few thousand microseconds, you should use delay() instead.

Syntax

delayMicroseconds(us)

Parameters

us: the number of microseconds to pause (unsigned int)

Returns

None

Example

 
int outPin = 8;                 // digital pin 8

void setup()
{
  pinMode(outPin, OUTPUT);      // sets the digital pin as output
}

void loop()
{
  digitalWrite(outPin, HIGH);   // sets the pin on
  delayMicroseconds(50);        // pauses for 50 microseconds      
  digitalWrite(outPin, LOW);    // sets the pin off
  delayMicroseconds(50);        // pauses for 50 microseconds      
}

configures pin number 8 to work as an output pin. It sends a train of pulses with 100 microseconds period.

Caveats and Known Issues

This function works very accurately in the range 3 microseconds and up. We cannot assure that delayMicroseconds will perform precisely for smaller delay-times.

As of Arduino 0018, delayMicroseconds() no longer disables interrupts.

See also

Reference Home

Corrections, suggestions, and new documentation should be posted to the Forum.

The text of the Arduino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.