Monitoring
OpenMixer can send any of the input sources to the Linux workstation and all four instances of netjack connected computers. To enable monitoring for a given source press the [MONITOR] button. Each input channel for the selected source will be sent to each corresponding channel of the Linux workstation and netjack computers (up to a maximum of 24 channels). The monitoring level will be defined by the input channel faders and master level control. To send a pre-fader signal press the [pre-fader] button (the monitor button has to be ON for this to have any effect). This is particularly useful for using the microphone preamplifier that is in the equipment rack. WARNING: be careful with your Jack routings, it would be easy to set up a feedback loop! Remember the location of the [MUTE] button. |