Difference between revisions of "Yoo Yeh 250B"
m (→Week 9: PiezoFlower Arrangments, Issues)
m (→Week 10: PiezoFlower Box!)
|Line 17:||Line 17:|
Revision as of 00:33, 11 March 2013
- 1 A PiezoFlower Arrangement
- 1.1 Week 10: PiezoFlower Box!
- 1.2 Week 9: PiezoFlower Arrangments, Issues
- 1.3 Week 8: PiezoFlower Garden, v.1 and v.2
- 1.4 Week 6-7: Looking for those hidden sounds
- 1.5 Week 4-5: Egg reverberation, Mini-Squids.
- 1.6 Week 3: Slinky Pianos, Giant Squids
- 1.7 Week 2: Brainstorming
A PiezoFlower Arrangement
by Yoo Hsiu (Yoo-Yoo) Yeh
for Music 250b: Interactive Sound Art
Week 10: PiezoFlower Box!
Bought a big sheet of wood at Home Depot and made... a BOX! Last week I had a basket from Costplus, but I felt it was too tall and unstable.
Also soldered a new set of "mixing" resistors and a more consistent set of audio jacks.
And switched back to the Paxton Gate vase, because it really is much nicer to not have a wire coming back out the top, something that Sasha had suggested many weeks ago. So I hot-glued the vase sideways to the BOX, and tried to un-hot-glue it, and cracked it on the side. Let's hope it holds until after Modulations.
Here's a photo of the new setup! Not quite done yet, but going for a kind of Zen, tilted feeling. Because they are kind of meditative.
And a video:
Week 9: PiezoFlower Arrangments, Issues
Bubble guns are too messy. So ... back to the drawing board.
Got lots of nail polish from Sasha -- and nine hours of nail polish, super glue, and solder fumes later (didn't really need those brain cells anyway~), I present to you:
Lily, Sunflower, and Orchid
Sunflower is having a bad hair day. :)
They are sent separately to two channels, for a more interesting effect. On left channel: Orchid flower and Lily On right channel: Orchid leaf and Sunflower Lily resonates the most.
The piezos are "mixed" by placing a 1kOhm resistor in series with each piezo, then putting the sets in parallel. Tried to get an op-amp working for a more official adder circuit, but it was late and my brain didn't want to work.
Played around some with the guitar effects pedal. The default one actually sounds really nice. Setting #52.
Right channel occasionally drops out. Will have to debug this next week.
I also put a piezo disk inside an eggshell (yes, inside), which you can see in the photo of Lily, but that actually does not make a very interesting sound - no particular resonance. And it is extremely fragile. So shelving that idea for now.
Week 8: PiezoFlower Garden, v.1 and v.2
This is a productive week! Today installed happy flower and spiky beautiful sound flower into their vases, with the help of some paperclips from Jonathan and lots of hot glue. Hot glue may rise up to rank in usefulness with zipties. :)
Eoin found a song using the slinky on top of happy flower's vase. Thanks to Samanthi for the leaves. They have proven very useful.
(Edit: hanging vases have arrived, and they are quite beautiful!) Also arrived: the small piezofilms from Digikey, which may fit better inside the hanging vases.
Additional variations, more soldering of audio jacks, piezo discs hooked together in parallel.
Vases from Paxton Gate coming in tomorrow. Bought a terrarium from Costplus World Market in the meanwhile, and filling it up and blowing bubbles at it! With or without the guitar effects, both have very interesting sounds.
Video: the "garden" so far, before placement in the terrarium
Jonathan says the low pitch of the flower petals may be related to quarter wavelengths. Maybe I can make a smaller flower and test this out! In any case, here's the latest iteration:
Acquired 30 additional slinkies/magic springs from Anya. Bought some more of my own. Ordered some online. Of varying sizes and shapes.
Actually building things - Sasha said I could cut up the sheet metal in the lab, and handed me a hot glue gun. I had previously been thinking of plastic or paper leaves/petals. Also lent me a guitar effects pedal. So we'll see what that sounds like!
Metal petals are actually really awesome! And the smiley face sticker is a MUST.
Week 4-5: Egg reverberation, Mini-Squids.
After I shorted my $17 Radio Shack amplifier, Travis mentioned that one could buy cheap headphone amplifiers online. Ordered a Fiio headphone amp for $4, and it is proving exceedingly useful for testing.
Sasha mentioned Helmholtz resonators in class. See previous doodle... I wanted to fan eggshells and make music come from holes in a wall. Still a possibility. Just need some amplification:
That's a condenser microphone inside a hollow eggshell (yes I washed it out first). It sounds really nice, actually. Something like a seashell. That's what it sounds like to be within an egg. :) I'll have to make a recording.
This week I switched from carrying around a slinky to carrying around a slinky, a piezo disk, audio amplifier, and headphones.
This is the week when I carried a small slinky around with me 24/7, to show anyone who would listen. :) And blew out a RadioShack amplifier.
Then, I think it was Eoin who mentioned the words "steel drum" and there happened to be one upstairs, so here we have the lovely
Both Eoin and my roommate Tamara says it looks like a giant squid. Tamara likes squids. :)
Still have plans to pop a balloon in Packard stairwell one of these days. Stomped down the metal stairs in tap-dancing boots the other day, that was LOUD.
more ideas doodles - John had an idea to pop balloons - well that is difficult - but bubbles pop! And they are easy to regenerate. so:
but first, I went somewhat slinky crazy. Starting collection of slinkies.. now.
Week 2: Brainstorming
today Sasha let me borrow the small Radio Shack amplifier+speaker and i tried to get my roommates to listen to my heartbeat through a piezoelectric disk. not as good as a stethoscope, but fun. :)
Going off the "rain chime", perhaps it could also be possible to have a "slinky piano"? :)
And if you have never been in the stairwell of Packard, I think the stairwell between floors 1 & 2, and 2 & 3, have great potential. Lots of echoes there, and the stairs are made of metal!