Difference between revisions of "The Sound of Sirens"

From CCRMA Wiki
Jump to: navigation, search
Line 21: Line 21:
  
 
6) Create a list of materials needed.
 
6) Create a list of materials needed.
motors
+
<br>motors
tubes/air hose
+
<br>tubes/air hose
air valves
+
<br>air valves
arduino
+
<br>arduino
power source
+
<br>power source
keys/piano/organ interface
+
<br>keys/piano/organ interface
  
 
7) Create a list of steps to achieve your Minimal Viable Product.
 
7) Create a list of steps to achieve your Minimal Viable Product.

Revision as of 11:30, 1 November 2013

3) Post any drawings you have done so far. Post pictures of abandoned designs as well as your original idea.

4) Find at least 5 examples of similar work on the wiki. This list should represent at least 2 hours of good searching. The pieces don't need to be exactly what you are doing - if there are no bicycle powered kalidescopes, look up bicycle art in general. Look at how they mounted the bikes, look at how they connected the pedals. This is your chance to learn from other people's hard work and experimentation.


5a) MVP: We built a disc with evenly spaced holes attached to a rotating motor and a 9V battery. Blowing on the spinning disc does indeed produce pitch! The motor was rather noisy until we figured out a position to squeeze it (near the top) that makes it virtually silent. Then, we iterated, and attached a potentiometer (fader) to control the voltage. 5b) We want to build a "siren organ" with some faders to control rotational speed of the motor(s) (frequency), other faders to control air speed (volume), and buttons to control valves to turn the sirens on/off. 5c) It's more about unlimited money. We're ditching the bike idea, I think.



multiple sirens
bike controlled
air flow
siren organ
multiple tubes with on/off control
solenoid: http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_169835_-1

5) Create an "elevator pitch" for your project. 2 - 4 sentence description of your project. This will be used on Wednesday when Ean Golden from http://www.djtechtools.com comes to talk to the class about his work. We will have some time for him to hear about your projects and give feedback but time will be limited so a short description will be necessary.

6) Create a list of materials needed.
motors
tubes/air hose
air valves
arduino
power source
keys/piano/organ interface

7) Create a list of steps to achieve your Minimal Viable Product.

8) Note the comments that I made for each group on Monday (Written Below) Bike Siren (Kevin, Gina, Dan) - The Bart Hopkin book is on my desk