The Sound of Sirens

From CCRMA Wiki

(Difference between revisions)
Jump to: navigation, search
(added video)
(added Gina's drawings)
Line 49: Line 49:
[[File:3-fader.jpg|800px]]
[[File:3-fader.jpg|800px]]
-
Spinnaface: single motor with fader control.
+
Some drawings from Gina.
-
[[File:VID_20131113_163549.mp4]]
+
[[File:Gina-drawings.jpeg]]
'''Examples of other work'''
'''Examples of other work'''

Revision as of 16:26, 14 November 2013

Rough schedule

11/05 - try out new parts bought recently (motor, ball valve, power supply) - buy different valves
11/06 - fix air compressor / hoses
11/07 - assemble arduino + faders (for motors) + power supply
11/08 - build software prototype of sound design and determine what other disks to cut
11/09 - continue to fix air compressor / hoses
11/10 - work on controller interface
11/11 - make any other aesthetic/sonic judgments (strobe light?)
11/12 - get small version working (at least 1 motor, air hose, arduino, disk, and faders)
11/13 - scale up, buy anything else we need
11/14 - buy more supplies
11/15 - assemble instrument
11/16 - work on enclosure design
11/17 - build enclosure
11/18 - build enclosure
11/19 - build enclosure
11/20 - debugging, final touches
11/21 - debugging, final touches
11/22 - due date

Sketches, photos, videos

Old sketch of "siren disks" mounted to a bike wheel.

File:Bike-siren2.jpeg

Older sketch of the sort of timbre that you can create from different holes in a disk. What looked like it would be amplitude modulation (and probably is, to an extent) is actually a rich harmonic series, according to Bart Hopkin.

File:Toneholes.jpeg

The siren organ with one motor and faders controlling the flow of air (pressure/volume).

File:1-motor.jpeg

The siren organ with faders controlling the speed of the motor--a hybrid design with the above.

File:Many-motors.jpeg


"Sounds-like" prototype with 3 faders and 3 motors. Just add discs and air.

Some drawings from Gina.

File:Gina-drawings.jpeg

Examples of other work

(* what the hell NAMTA? http://www.namtamusic.com/siren-wi-organ-lessons)


MVP. We built a disc with evenly spaced holes attached to a rotating motor and a 9V battery. Blowing on the spinning disc does indeed produce pitch! The motor was rather noisy until we figured out a position to squeeze it (near the top) that makes it virtually silent. Then, we iterated, and attached a potentiometer (fader) to control the voltage. This successfully created a moving pitch that sounded very siren-like!


The Plan. We want to build a "siren organ" with some faders to control rotational speed of the motor(s) (frequency), other faders to control the applied air pressure (volume), and buttons to control solenoid valves to turn the sirens on/off.


Unlimited Resources Vision. It's more about unlimited money than time--I think we can achieve something cool. We're ditching the bike idea, I think.


Elevator Pitch. An "organ of sirens" with the feel of a MIDI instrument. Faders control the volume and frequency of mechanical sirens, while buttons turn them on and off.


Materials Needed
* motors (6, one for each disk)
* MOSFETs (6) http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_669951_-1
* tubes/air hose (24)
* solenoid valves (24):
* 7psi model (might need more): http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_169835_-1
* air directional control valves: http://www.mcmaster.com/#air-directional-control-valves/=p6xufn
* arduino (1)
* power source (1?) http://www.12vadapters.com/adapter/power-supply/12v/10-amp-10a.html
* keys/piano/organ interface (faders + buttons + enclosure)
* disks (12)
* enclosures for the disks (6)
* horns? (6)
* also check out air (pneumatic) controls for air rifles, potato canons, pipe organs, etc. http://www.youtube.com/watch?v=DG6own141z0 shows how to make a homemade check valve with pvc connectors and a bouncy ball.


Next Steps. The next steps are to build a 5-fader, 4-button, 1-motor model, where 4 faders are devoted to air hoses over the individual rings of 1 disk (different pitches) and control the air pressure of each hose, and 1 fader is dedicated to the spin of the motor. The 4 faders could possibly control ball valves to partially open/close the air hoses as opposed to flow, which we do not have a good grasp of how to control (cheaply; a regulator might work). The buttons could also serve as the valve control, or could power on/off the air supply.

We need to figure out how fast we want the individual motors to go, and how much power they need to all spin at the same speed. This will let us tune our organ.

Personal tools