- 1 What is the Max Lab?
- 2 Purpose of this Wiki
- 3 Using the Max Lab
- 3.1 Cleaning and Caring for the Lab
- 3.2 Safety Practices
- 3.3 Other Protocols
- 3.4 Emergencies
- 4 Tools
- 5 Supplies
- 6 CCRMA @ Satellite Supplies
- 7 Projects
What is the Max Lab?
The Max Lab is the hub of what we call Physical Interaction Design at CCRMA. Named after Max Mathews, the Max Lab is where we focus on hardware and software interfaces for interacting with sound.
Lou Harrison, from "Music Primer," 1971 C.F Peters Publishers
We are physically located in Rm. 103 of The Knoll.
During any given term, the Max Lab may have up to 50 users, including students of Music 250 -- Physical Interaction Desgin for Music and Music 36N -- Experimental Musical Instruments. Regular inhabitants of the Max Lab are:
There are 2 prerequisites to using the Max Lab:
1. You need to have a CCRMA account and access card in order to enter the lab. People who are unfamiliar to regular Max Lab users will be asked to log in to a CCRMA machine and open the Max Lab door in order to demonstrate that they are a current CCRMA user. If you are a Max Lab user, and someone you don't recognize attempts to use the Lab, do the same. It is the responsibility of the entire community to ensure our safety, security and the continued availability of resources.
2. As of Fall 2006, new Max Lab users must all receive a 30-minute safety and courtesy briefing. Please contact Sasha Leitman (sleitman at ccrma) or Michael Gurevich (gurevich at ccrma) to schedule a briefing.
The Max Lab is available 24 hours a day. The door automatically locks when it is closed. The door can be left open only when someone is working in the lab. If you are the last person to leave the lab, turn off the lights, close the windows and close the door behind you. This applies at all times, even during the day.
Purpose of this Wiki
This Wiki entry is a portal to help CCRMA faculty, staff and students who want to use Max Lab, and for the rest of the world to learn more about what we do. If you work on a project in the Max Lab, please document it (either with a new Wiki entry, or on your website) and add a link under the Projects section below. If you become an expert at using some of the tools in the Max Lab, please add a tutorial under the Tools section.
This is also the place to find information and guidelines that will improve your experience in using the Max Lab. Below you will find a lists of the tools that are available, with guidelines on how to safely and effectively use them. General safety and courtesy protocols are listed below in Using the Max Lab. We also maintain a list of Supplies that are normally kept on hand, along with datasheets and information on where to order them.
Using the Max Lab
Cleaning and Caring for the Lab
There is a large number of people using the lab, and it doesn't take long for the lab to get very dirty. Our cleanliness rule is as follows:
Leave the lab cleaner than when you found it.
This means thoroughly cleaning up your mess, in addition to something else. It only takes a couple minutes to sweep the entire floor or wipe down all the work surfaces. Plan on stopping your work at least 15 minutes before you need to leave, or longer if you've made a big mess. This will give you enough time to properly put away all the tools or components you have used, and to clean up the lab.
The Max Lab contains many power and hand tools for your use, but many of these tools are dangerous if used improperly. Important safety precautions must be obeyed.
General Safety Common Sense
Use common sense to keep the lab safe and your fellow lab users happy. Examples of common sense:
- If something seems like a bad idea it probably is. Don't do it.
- Don't leave things on the floor that people may trip on.
- If you run an electrical cord across the entire lab, someone will probably trip over it.
- If you are about to make a loud sound or turn on a loud tool, warn those around you.
Work in Pairs
It is always a good idea to have someone else around while you are working in the lab, especially if you are using power tools. Try to avoid working alone wherever possible.
- Wear appropriate clothing for what you are working on.
- Avoid bulky clothes that may get caught or snagged on tools or soldering irons.
- Remove long necklaces or dangling jewelry.
- If you have long hair, tie it back.
- Wear closed-toed shoes (i.e. NO FLIP-FLOPS). Even if you are not using them, there may be others around using heavy or sharp objects like clamps or cutting tools that can fall on your feet.
Safety glasses, disposable foam ear plugs, dust masks and work gloves are available for your use. Eye protection must be worn at all times while you are cutting, drilling, soldering, or near to anyone who is doing any of these. Use your discretion for when to use ear plugs and dust masks.
Ventilation and Dust
The Max Lab is not set up with an industrial ventilation system. Furthermore, it contains and is used to produce many sensitive electronic devices. This means that you should avoid using hazardous chemicals or creating large amounts of dust in the lab. If you are soldering or making moderate amounts of dust, open the windows to help air circulate. Make sure to close the windows when you leave. And as always, thoroughly clean up your mess and one other before you leave.
Absolutely no alcohol may be consumed in the lab. Do not use the lab if you are intoxicated or your coordination may be impaired. This includes fatigue. Especially toward the end of term you may be run down and working late. If you are very tired, its not a good idea to operate power tools.
Appropriate Use of Tools
The Max Lab contains many specialized tools. However, it is not a machine shop or a woodworking shop, and doesn't have every tool that you may need. It is generally a bad idea to use a tool for something for which it was not intended. This is a great way to break tools and cause accidents. For example, a jigsaw is not meant for cutting through-holes, and the drill bits we have are not for cutting titanium. If you have a very specific need, you may need to look to work elsewhere, the Product Realization Lab, for example. Also, things like screwdrivers or hammers should not be used as percussion mallets. Feel free to use your own tools for this purpose, but not those from the lab. If you do not know how to use a tool, ask a staff member. Some general principles apply:
- Your work should always be securely or properly fixtured – this applies to any cutting or finishing tools.
- Keep electrical cords away from cutters or sources of heat or liquids.
- Never orient a cutting tool toward your body. Don't drill something while holding it in your hand, and always move a power saw away from you.
- Don't try to use a drill bit as a milling tool. We have some endmills for milling with the drill press and cross vise. Ask someone for help if you aren't sure how to do this.
Be aware of your fellow lab users. Some things that may not be immediately obvious:
- Be aware of the size of your workspace. Your neighbour won't appreciate it if your sawdust flies into her laptop.
- Space is at a premium. Leaving your project on a desk means that someone else won't be able to work there.
- Some past projects, components, and the Music 250 prototyping kits do remain in the lab by special arrangement. Don't play with or use parts that don't belong to you, unless they are in the scrap bin (see the next point).
There is a designated “Scrap bin” in the corner beside the workbench. You may use materials in the scrap bin for your projects. If you see something else that looks like scrap, it probably isn't. Always ask before handling or using materials from outside the scrap bin.
Again, the lab is small. There is very little room for storage in the lab. Floor space should never be used for storage. You may store things only for very short periods of time (e.g. while waiting for glue to dry) only if they are clearly labeled and you can find an appropriate place for them. If you leave something in the middle of a desk, it is occupying space that someone else can no longer use. Note that Max's desk is not a good place to store things. CCRMA's lockers are the best place to store your stuff that you can't take home.
Obviously tools make noise. Many projects make sound as well. There is a fine line between testing your noise-making project and “jamming”. Testing is welcome and encouraged where it is necessary. In order to conserve space in the lab and to avoid disturbing other users, take your project elsewhere to jam. There are other spaces available for jamming, including studios at CCRMA, practice rooms in Braun, and your house.
Caring for our Tools
In addition to using tools properly, they need to be cared for.
- Some power tools have cases, to which they should be returned after use. They should be left clean and free of dust and debris.
- Drill bits and saw blades should only be used to cut their intended material. Using them even once on other material essentially ruins them for everyone else. If bits or blades are dull, please inform Sasha.
- Handle drill bits and cutting tools with shop rags, and don't leave them on desktops or drop them. This will keep them sharp.
Putting Things Where They Belong
Tools should not be removed from the lab. If you have a messy project that requires you to work outside, you may take the tools you need and return them to the lab promptly. Tools should never leave the Knoll.
Certain dangerous or valuable power tools are kept in a locked tool cabinet. Max, Bill, Michael and Sasha have keys to the cabinet and can open it to allow use of these tools while they are present. If you need to use tools from the cabinet, try to plan ahead so that you are doing so during consultation hours.
The Lab is not very big, and currently has around 50 regular users. For this reason, please don't bring guests into the lab. If you need someone to help you with a project, you may bring a guest provided that they have been thoroughly briefed on lab safety and obey all the safety and courtesy practices outlined here. You are responsible for the conduct of any guests.
In case of an emergency, pick up a CCRMA telephone (there are 2 in the lab), select a line by pressing one of the buttons on the top row, and dial 9911.
For minor accidents, a First Aid Kit is located in the Lab in the open upper cabinet beside the drill press.
In case of fire, there is a fire extinguisher as well. Familiarize yourself with the locations of the telephones, safety equipment and building exits in case of emergency.
|Supplier||Description||Mfg. Part #||Supplier Part #||Note|
|Futurlec||Nice pots that plug into breadboards||web link|
|Eeonyx Corp||Piezoresistive fabric||web link||1kohm/sq or 10kohm/sq|
|Aura||Pro bass shaker||299-028||299-028|
|K&J Magnetics||Strong neodymium magnets||Website|
|Magnetic sensor systems||Tubular electromagnet||E-66-75||E-66-75|
|Surplus servomotors||eBay or HSC or Electronics flea market|
|continuous servo motor||R174-CONT-RO-SERVO||Cont Rotation Servo|
|standard servo motor||R276-S03N-SERVO||Servo|
|Wireharness for Sharp IR distance sensors||C1-HB-12-15-CBL||Has handy male pins pre-crimped for protoboard use.|
|20x2 LCD with Backlight||CFAH2002A-YYH-JT||CFAH2002A-YYH-JT|
|reflective optical ("tape") sensor||QRB1114||QRB1114-ND||*preferred|
|op-amp||TLC274IDR||296-1314-1-ND||for Pascal Stang's ADXL board|
|adc chip||ADS7828||296-12402-1-ND||8ch, 12-bit, I2C|
|6mm tact switch 100g||B3F-6000||SW263CT|
|sharp ir range finder||GP2Y0A21YK||425-2046-ND||10-80 cm, analog. Cheaper at Acroname, cheaper still at Sparkfun.|
|GP2Y0A02YK0F||425-2062-ND||20-150 cm, analog|
|Piezo Vibration sensor||LDTM-028K||MSP1007-ND||with mass|
|slide pot||EVA-Q12C15B14||PQ1060SB-ND||60mm travel, linear taper|
|encoder, 12mm rotary||EVE-GA1F2024B||P10860-ND||Detents, 24 counts per revolution|
|Hall sensor, Linear||SS49E||480-2006-ND||Honeywell|
|3.3V regulator||TC1262-3.3VDB||TC1262-3.3VDBCT-ND||for Sparkfun LIS3LV02DQ Accel. Board|
|accelerometer||ADXL311JE||ADXL311JE-ND||for Pascal Stang's ADXL board|
|breadboard, 6.5"x1.375" 630pn||20669|
|breadboard, 6.5"x2.125" 830pn||20722|
|connector idc socket, 10 cont||32492||2x5|
|connector idc socket, 16 cont||119467||2x8|
|.1" solid header, rt. angle friction lock||688271||8 contacts|
|.1" solid header, straight friction lock||688028||8 contacts|
|.1" solid header, rt. angle friction lock||688221||3 contacts|
|.1" solid header, straight friction lock||687965||3 contacts|
|connector, .1", 1RW, 2pin hsg||100812|
|connector, .1", 1RW, 3pin hsg||157383|
|connector, .1", 1RW, 4pin hsg||100803|
|connector, pin, male||145358|
|connector, pin, female, post tin||100766 (in Dec 2008 Wendy brought in 100765 from home)|
|MTA-100 IDC Connector 24AWG/4Pin||750901||Close-End Style Without Polarizing Tabs with Locking Ramp; for I2C 4pin header|
|header, st male, 1rw, 40 pin||160882|
|header, st male, 2rw, 40 pin||53532|
|heat shrink tubing 3/32" dia||71871|
|heat shrink tubing, 1/16" dia||71327|
|heat shrink tubing, 1/8" dia||71280|
|Nut, hex, 4-40||40943|
|Standoff, 4-40x1/2” M/F||111755|
|Standoff, 4-40x3/8” M/F||77594|
|pwr sply, sw, wall, 15V, 1.0A||252902||thin wall warts|
|rubber feet, adhesive, black, 100||142658||Cylindrical|
|Photocell grab bag||169578||NEVER AGAIN!!! They're mostly broken.|
|USB 2.0 Cable, A to Mini 5 male, 5'6", black||2081481|
|USB 2.0 Cable, A/B, 10', clear||229607||WARNING: THESE ARE FOR THE OLD BOARDS FROM PASCAL!|
|Power supply wall 12V/1A||252823|
|serial cables||199638CH||6' M-F black|
|socket, stnd din female 5pin||15843||Midi connector|
|solid wire, 22 awg black, 100'||36792|
|solid wire, 22 awg green, 100'||36822|
|solid wire, 22 awg red, 100'||36856|
|solid wire, 22 awg white, 100'||36881|
|solid wire, 22 awg yellow, 100'||36920|
|10 conductor flat cable||643508|
|twisted pair, red white||173147CH|
|twisted pair, black white||173164|
|speaker, flat, magnetic piezo||76030||updated fall 2008|
|terminal, disconnect female||106921|
|5-cond. unshld wire, 22awg, 100'||733083|
|Ultrasonic transm+sensor 40kHz||40TR12B-R||139492|
|.5" circle FSR||Model 402|
|OEM developer's kits||Model 400|
|Copper foil conductive tape||No. 758ST918|
|pot 50k 3/8" horiz||594-63P503T7|
|pot 50k 3/8" round||652-33525-1503|
|Triple Axis Accelerometer Breakout – LIS3LV02DQ (datasheet)||Sense-LIS3LV02DQ|
|Sharp Infrared Proximity Sensor||GP2Y0A21YK.pdf||GP2Y0A21YK|
|3-pin JST Wire Harness for Infrared Proximity Sensor||SEN-08733||for Sharp Infrared Proximity Sensor. Almost as good as the Acroname harness.|
CCRMA @ Satellite Supplies
|Supplier||Description||Mfg. Part #||Supplier Part #||Note|
|Amazon||USB mini-B cable||Retractable USB cable||any short cable will do!|
|USB/Ethernet hub||GWC HE2440 USB 2.0 4-port hub with ethernet adapter|
|4GB SD Card||Kingston 4GB microSD card with adapter|
|Gravitech||Arduino Nano 3.0||[hhttp://store.gravitech.us/arna30wiatp.html ARD-NANO30]|