Difference between revisions of "MaxKit"
From CCRMA Wiki
| Line 1: | Line 1: | ||
Here is what is in your MaxKit: | Here is what is in your MaxKit: | ||
| − | 1 Arduino Nano 3.0 | + | *1 Arduino Nano 3.0 |
| − | 1 Breadboard | + | *1 Breadboard |
| − | 1 Multimeter | + | *1 Multimeter |
| − | 1 USB cable | + | *1 USB cable |
| − | 1 3-axis Accelerometer | + | *1 3-axis Accelerometer |
| − | 1 Sharp Distance Sensor | + | *1 Sharp Distance Sensor |
| − | 1 Wireharness | + | *1 Wireharness |
| − | 1 Force Sensing Resistor | + | *1 Force Sensing Resistor |
| − | 1 Flex sensor | + | *1 Flex sensor |
| − | 1 Color Button switch | + | *1 Color Button switch |
| − | 1 Tact switch | + | *1 Tact switch |
| − | 1 Piezo sensor | + | *1 Piezo sensor |
| − | 2 Knob pots | + | *2 Knob pots |
| − | 2 Red LEDs | + | *2 Red LEDs |
| − | 2 Green LEDs | + | *2 Green LEDs |
| − | 2 Yellow LEDs | + | *2 Yellow LEDs |
| − | 1 RGB LED | + | *1 RGB LED |
To be added: jumper wires, lever switches | To be added: jumper wires, lever switches | ||
Revision as of 02:03, 29 September 2009
Here is what is in your MaxKit:
- 1 Arduino Nano 3.0
- 1 Breadboard
- 1 Multimeter
- 1 USB cable
- 1 3-axis Accelerometer
- 1 Sharp Distance Sensor
- 1 Wireharness
- 1 Force Sensing Resistor
- 1 Flex sensor
- 1 Color Button switch
- 1 Tact switch
- 1 Piezo sensor
- 2 Knob pots
- 2 Red LEDs
- 2 Green LEDs
- 2 Yellow LEDs
- 1 RGB LED
To be added: jumper wires, lever switches
