Laptop Workstations

From CCRMA Wiki
Revision as of 23:55, 23 September 2010 by Carrlane (Talk | contribs) (Changing Sampling Rate)

Jump to: navigation, search

Quad Speaker System

UA-101 Audio Interface

Here's a review that explains things pretty well about the card [1].

Driver Installation

Macintosh

Windows

Linux

Changing Sampling Rate

Changing the sampling rate requires restarting the interface. Turn the SAMPLE RATE knob to the desired new sampling rate (normally 48 or 44.1kHz). Nothing actually happens until you restart the interface with the OUTPUT/POWER knob turned all the way down (counter-clockwise) until it clicks (the power light goes off). Turn it back to restart. The knob then becomes the volume or OUTPUT knob which controls the headphone volume but not the volume on the quad speaker setup. It's best to make sure you've got it set to the sampling rate set to what you think you will be working with, before you start your audio software. Just makes things cleaner. If you have to change the sampling rate while you are working with applications, first make sure you've saved your session files, because doing so may have unpredictable results.