Laptop Workstations

From CCRMA Wiki

(Difference between revisions)
Jump to: navigation, search
(Changing Sampling Rate)
(page has moved to Drupal)
 
(12 intermediate revisions not shown)
Line 1: Line 1:
-
==Quad Speaker System==
+
This page has moved to [https://ccrma.stanford.edu/room-guides/laptop-audio-workstations this location]
-
 
+
-
==UA-101 Audio Interface==
+
-
 
+
-
Here's a review that explains things pretty well about the card [http://www.soundonsound.com/sos/may05/articles/edirolua101.htm].
+
-
 
+
-
===Driver Installation===
+
-
 
+
-
====Macintosh====
+
-
====Windows====
+
-
====Linux====
+
-
 
+
-
===Changing Sampling Rate===
+
-
 
+
-
Changing the sampling rate requires restarting the interface.  Turn the SAMPLE RATE knob to the desired new sampling rate (normally 48 or 44.1kHz).  Nothing actually happens until you restart the interface with the OUTPUT/POWER knob turned all the way down (counter-clockwise) until it clicks (the power light goes off).  Turn it back to restart.  The knob then becomes the volume or OUTPUT knob which controls the headphone volume but not the volume on the quad speaker setup.  It's best to make sure you've got it set to the sampling rate set to what you think you will be working with, before you start your audio software.  Just makes things cleaner.  If you have to change the sampling rate while you are working with applications, first make sure you've saved your session files, because doing so may have unpredictable results. 
+
-
 
+
-
 
+
[[Category:CCRMA User Guide]]
[[Category:CCRMA User Guide]]

Current revision as of 13:49, 20 October 2010

This page has moved to this location

Personal tools