Difference between revisions of "John Granzow 250B"

From CCRMA Wiki
Jump to: navigation, search
Line 46: Line 46:

Latest revision as of 23:10, 10 March 2013

Room/impulse race

This was an initial idea to use an air valve as a mixer, setting in motion a race function between the roundness of the room and the inflation rate (pop time) of the balloon. A microphone would record the burst inside the elastomeric room and deliver a reverb, that might be scaled down to predecit responses of much larger rooms under similar distortions.

IMG 1654.JPG

Fourked tongue

This idea is to advance the evolving daxophone. This mutant splits its voice over four channels into separate horn drivers, filtered by silicone vocal tract models. The models are modular so participants can modify the quadripthong.

IMG 1677.JPG

Splitwire copper Lentils

These copper saucers segment the piano wires from which they suspend. The wire is attached to bridges coupled to the inside of the top and bottom surface. These bridges transfer vibrations from the bowed wire to the lenticular chamber. Adding tension pulls them slightly apart, changing the chamber shape. I would like to try hammering these copper dishes. The hammering could be recorded and played back into the strings via reversed magnetic pickups.


Beginning to cut sheet, and sink Cu with hammer and sand bag.



A cymbal - to form the sound of its own forming perhaps?


Xenakis through hi hat: http://www.youtube.com/watch?v=kfigRJ8UuO4



Radelescu through hi hat


Now some experiments as a speaker for projections - here a friction idiophone driven by a ship's rocking, heard through hi hat

IMG 3240.JPG