Music 250A Final Project: Vocal Effects Glove
• Will be targeted toward a specific genre of music (right now, playing with the idea of island reggae/Hawaiian jams.
• Will try to focus on making one glove with good design and functionality, but may make a backup glove as well (not a right and a left, but two lefts).
Examples - Gloves Projects
1. The “DIY Arduino Data Gloves” – from How to Get What You Want http://www.kobakant.at/DIY/?p=4639
--a. Showcases a great design, and a video demonstrates nice functionality (data feedback of hand movement) to control a range of processes.
--b. The Gloves Project page (http://theglovesproject.com/category/diy/) has full the instructions on how this glove is made. Includes materials, tools, pattern, sewing instructions, soldering instructions, … , calibrating, programming, going wired or wireless, and integration with software.
--c. Love the look of these gloves. The bend sensor connection area looks well protected (ends are covered with neoprene squares). The palm is open (no material), so glove does not get hot, I presume. Good design element, since I was considering a skeleton of a glove for this reason. --d. TWO sensors can actually be used for each finger, to register each knuckle bending. I will probably just start with one for each finger and see how the results are.
2. The StretchSense stretch sensors can measure flexible body movement, such as that of the hand, and are equipped with wireless technology. www.stretchsense.com
--a. Demonstration of hand with visualization app at 2:20 in this video: http://youtu.be/7uh0UWPEur4
--b. While a great demonstration, very very expensive sensors for what I will be doing ($850 USD for a starter evaluation kit)
--c. The DESIGN, however, is more along the lines of the skeleton glove I thought about. End segments of each finger can be placed into holders, and glove can stretch over back of hand.
3. Controlling a humanoid hand, which mimic a user’s hand movement in a glove (and which can grasp objects) http://www.contrib.andrew.cmu.edu/~msakmar/
--a. One flex sensor attached to each finger, and one across the palm
--b. Interesting problem to be aware of: “readings from the flex sensors would change dramatically from each use.” Believed to be from…"heat built up during testing and from wearing the glove for extended periods of time…We worked around this problem by calibrating the flex sensors every time we restarted the arduino and robotic hand setup."
--c. "Our second problem, which is partially related to the first, was correctly mapping the analog readings from the flex sensors to the servos. The issue was that the range of the flex sensors was too small; the analog read-in of the arduino has 1024 degrees of resolution, but the flex sensors would only differ from 550 to 750. We accounted for this by using the map function in arduino and by calibrating repeatedly. Calibration consisted of wearing the glove and running the arduino with code that read in and printed out each flex sensor value. We recorded the minimums and maxes of each flex sensor and used those values as input for the map function."
--d. Duct Tape doing good things: “Our fourth problem was attaching the flex sensors to the glove. We initially had a glove that allowed the flex sensors to move in between slits that we made in the glove. Our observation was that this resulted in readings that were too similar (the value range between straight and bent was too small). Thus, we went down the opposite path and fixed the flex sensors to all parts of the glove using duct tape. This made our glove more stiff, but resulted in better flex sensor readings”
4. Piano gloves – Buttons on end of fingers, but can look to for other design possibilities. http://vimeo.com/7992026
Minimal Viable Product - To Do List
Get one effect working seamlessly, attached to index finger.
1. Develop max patch for a reverb, echo, or pitch shift effect in real time (get max patch working well on laptop)
2. Route input from one flex sensor on the arduino board to the Max patch (like in lab)
3. Figure out how the values should map to the main effect parameter in the patch.
4. Extend flex sensor from arduino board using long connectors, and attach sensor to finger, such that hand can be moved more freely.
Final Deadline - What-I-want-to-get-done List
Steps to Achieve the Minimal Viable Product
-Target in on a genre that the effects would gel well with.