CCRMA Satellite How To Connect RevC

From CCRMA Wiki
Revision as of 21:52, 9 May 2013 by Eberdahl (Talk | contribs)

Jump to: navigation, search

How To Connect

On this page, we explain how to connect to Satellite CCRMA over the Ethernet cable.

Mac OS X

If you are using Mac OS 10.6.3 through 10.8, you need to install XQuartz so that XWindows will work. (Prior versions (10.5+) have XWindows installed by default in the OS X Developer Tools, but if it is missing for you then first try downloading X11 from the same link.)

Go to System Preferences, select Network, and choose the Ethernet module. Write down your current settings in case you think that you might need them in the future. (For example, if you use Ethernet to connect to the Internet in your dormitory, you probably want to save these settings for when you go home.) Now change your Ethernet settings to the following:

Configure: Manually

IP Address:

Subnet Mask:

The remaining items such as Router, DNS Server, and Search Domains can be left blank for now, and click the Apply button in the bottom right to apply the settings.

If your laptop is currently connected to the Internet using some method other than Ethernet: It can be convenient to enable your kit to get onto the Internet. Internet Sharing will not work on Mac OS X 10.7 (Lion) or Mac OS X 10.8 (Mountain Lion), so skip this step on those systems. Go back to System Preferences and choose Sharing. Edit the settings so that your Internet connection is shared with the Ethernet port. In order to do this, you may have to disable Internet Sharing temporarily. Finally, click the Internet Sharing checkbox to enable this option.

You will use the Terminal program to login to Satellite CCRMA over the Ethernet connection.

Now open up a window in Terminal. Your Satellite CCRMA kit should choose the IP address To check that it is visible type the command ping, and see how fast the network response is. Once you are satisfied, hit Control-C to quit ping. Then, to finally login to Satellite CCRMA, type

ssh -XY ccrma@

The password should be temppwd.

Windows 7

Windows 7 users should follow this link


Instructions for Ubuntu 10.04 Netbook Remix:

Run ifconfig in a terminal and look for your wired ethernet device. It will probably be called "eth0". Copy down the value next to HWaddr.

Go to "System" -> "Network Connections".

Under the "Wired" tab of the dialog that opens click "Add".

Set the "Connection name" to something logical, like CCRMA Satellite. Paste the value you copied from HWAddress in the "MAC address" box.

Click the "IPv4 Settings" tab. Change "Method" to "Manual". Next to "Addresses" click "Add". In the "Address" column type "". In the "Netmask" column type "". Click "Apply".

In the notification area on your desktop panel, click the NetworkManager Applet icon. Select the connection you just created. You now should be able to ssh into the board by typing ssh -XY ccrma@ in a terminal. The password is temppwd

For internet connection sharing, this link might help (I haven't tried it yet):

250a 2009