Difference between revisions of "CCRMA IPL Studio C User Guide"

From CCRMA Wiki
Jump to: navigation, search
 
(31 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
[[Category:CCRMA User Guide]]
 
[[Category:CCRMA User Guide]]
 
=Studio C: Getting Started=
 
=Studio C: Getting Started=
All audio signals from the Macintosh are routed into the the Yamaha DM1000 digital mixer via an optical line out card. You will need to make sure system preferences on the mac are set to the right output, and also that the mixer has the right settings.
+
Welcome to the Intermedia Performance Lab, CCRMA's mothership of audio and visual design. This guide is designed to familiarize you with how to effectively use this studio. 
 +
 
 +
AUGUST 2015 USER GUIDES AND INSTRUCTIONS [http://ccrma.stanford.edu/room-guides/studio-c  Studio C Guides]
 +
 
  
 
==Sound==
 
==Sound==
Start by getting any kind of a audio signal playing from the mac (I go with pandora or itunes).
+
Start by getting any kind of a audio signal playing from the mac.  All audio signals from the Macintosh are routed into the the Yamaha DM1000 digital mixer via an optical line out card. You will need to make sure system preferences on the mac are set to the right output, and also that the mixer has the right settings.
  
Now Look at the mixer. Try selecting Layer Channels 17-32, and raise the first two channel sliders.  If that doesn’t work, read on...
+
Now look at the mixer. First try.
  
[[Image:10blah.jpg]]
+
'''The Layer Selector''': On the right side of the mixer, just below the scroll wheel, selects which channels the 16 sliders act upon.
 +
 
 +
In our case we want to select Layer '''17-32'''.
 +
 
 +
Now raise the first two channel sliders on the far left of the console, as well as the master level.  Hopefully you are getting sound right away.  If not, read on.
 +
 
 +
[[Image:9blah.jpg]]
 +
 
 +
 
 +
'''The Diamond-shaped buttons''' allow you to navigate different display screens. Each time you press the button a different menu screen will be diplayed. A few useful buttons are:
 +
 
 +
'METER': allows you to view input signals across the mixer
 +
 
 +
'SCENE': allows you to store and recall presets
 +
 
 +
'INPUT/OUTPUT PATCH': allows you to determine where signals flow to and from.
  
 
Press the “Scene” Button on the bottom right of the Desplay Access set of buttons.  From there make sure that “5 MAC PRO PLAYBACK” is selected.  Use the scroll wheel to select this preset, and either press “enter” near the scroll wheel, or “recall” in the “scene memory” section in the bottom right corner near the screen.
 
Press the “Scene” Button on the bottom right of the Desplay Access set of buttons.  From there make sure that “5 MAC PRO PLAYBACK” is selected.  Use the scroll wheel to select this preset, and either press “enter” near the scroll wheel, or “recall” in the “scene memory” section in the bottom right corner near the screen.
  
Next, '''Select Layer “17-32”''', in the white area on the right side of the mixer near the scroll wheel.
 
Raise channels one and two on the mixer sliders.
 
  
You should now be hearing sound. Please refer to “Troubleshooting Sound” if you are not.
+
 
 +
[[Image:10blah.jpg]]
 +
 
 +
Repeat selecting  Layer '''17-32'''.  And raising the first two channel sliders on the far left of the console, as well as the master level. 
 +
 
 +
You should now be hearing sound. If not, please refer to “Troubleshooting Sound”.
  
 
==Visuals:==
 
==Visuals:==
Line 37: Line 58:
  
 
'''Note:'''  Sometimes, when the displays are off, the computer will still recognize them as operational, and it will allow the mouse to move thorugh to them.  This can result in “losing the mouse”.  There is nothing in the bottom left of the main screen, so drag the mouse down and to the left to try to find it again.
 
'''Note:'''  Sometimes, when the displays are off, the computer will still recognize them as operational, and it will allow the mouse to move thorugh to them.  This can result in “losing the mouse”.  There is nothing in the bottom left of the main screen, so drag the mouse down and to the left to try to find it again.
 +
 +
 +
 +
.
  
 
==Software==
 
==Software==
Line 43: Line 68:
  
 
'''Adobe Suite'''.  Includes:  
 
'''Adobe Suite'''.  Includes:  
 +
 
Photoshop, Illustrator, and InDesign (Image and Layout editing tools)
 
Photoshop, Illustrator, and InDesign (Image and Layout editing tools)
 +
 
Flash (Animation, interactive web)
 
Flash (Animation, interactive web)
 +
 
Fireworks, Dreamweaver (Web Design)
 
Fireworks, Dreamweaver (Web Design)
 +
 
After Effects.  (Special effects, video, animation)
 
After Effects.  (Special effects, video, animation)
 +
 +
  
 
'''ArtMatic Voyager''' (3D Rendering and Animation Suite)
 
'''ArtMatic Voyager''' (3D Rendering and Animation Suite)
 +
  
 
'''Final Cut Studio''' Includes:
 
'''Final Cut Studio''' Includes:
 +
 
Final Cut Pro (Industry standard video editor.  Useful for large projects)
 
Final Cut Pro (Industry standard video editor.  Useful for large projects)
 +
 
Motion (State of the art special effects / animation tool)
 
Motion (State of the art special effects / animation tool)
 +
 
Color (Color and special effect mastering suite for video)
 
Color (Color and special effect mastering suite for video)
 +
 
DVD Studio Pro
 
DVD Studio Pro
 +
 
Compressor (Easily create batch conversions of video files to any format)
 
Compressor (Easily create batch conversions of video files to any format)
Sountrack Pro (Easily link final cut projects for audio mastering/mixing
+
 
 +
Sountrack Pro (Easily link final cut projects for audio mastering/mixing)
 +
 
 +
 
  
 
'''Isadora''' (Realtime video processor, utilizing object-oriented programming.  Exceptionally stable and very simply and powerful to learn. Fully customizable inputs/outputs)
 
'''Isadora''' (Realtime video processor, utilizing object-oriented programming.  Exceptionally stable and very simply and powerful to learn. Fully customizable inputs/outputs)
Line 69: Line 109:
  
 
'''Snaps Pro''' (Powerful screen capture tool)
 
'''Snaps Pro''' (Powerful screen capture tool)
+
 
 +
 
 +
 
 +
.
 +
 
 
==Making the Software Work==
 
==Making the Software Work==
 
'''Final Cut:'''
 
'''Final Cut:'''
If final cut is quitting before loading, you need to trash your use preferences.  Go to Finder => <<username>> => Library => Preferences
+
If final cut is quitting before loading, you need to trash your user preferences.   
 +
 
 +
Go to Finder => /MY_username => Library => Preferences
  
 
There are 4 files you need to delete:   
 
There are 4 files you need to delete:   
 
1) com.apple.FinalCut.plist
 
1) com.apple.FinalCut.plist
2) Final Cut Pro User Data => Final cut prefs, prefs, obj cache, prof cache.  Delet all of them.
+
2) Final Cut Pro User Data => Final cut prefs, prefs, obj cache, prof cache.   
 +
Delete all of them. Don't Worry
  
 
Empty the trash, and the program should now open.  (this has something to do with networked user preferences).
 
Empty the trash, and the program should now open.  (this has something to do with networked user preferences).
  
Set Scratch Discs:  Make sure to select where you will be writing your captured video and renderings to.  File => System Settings.  
+
Setting Scratch Discs:  Make sure to select where you will be writing your captured video and renderings to.  File => System Settings.  
 +
 
 +
 
  
 
'''Isadora:'''
 
'''Isadora:'''
Introduce several object on the canvas:  Movie player, explode, OSC listener, and projector.  Select File => Import media.  Select a movie file, set horz siz and vert size on the explode object to five.
+
Isadora is a fantastically stable method for creating real-time interactive video projects.  It accepts MIDI, OSC, and Serial, as well as running machine-vision and blob detection.
 +
 
 +
Quick Tutorial:
 +
 
 +
Introduce several object on the canvas:  Movie player, explode, OSC listener, and projector.  Select File => Import media.  Select a movie file, set horz size and vert size on the explode object to five.
  
 
Select Window => Show Stages.
 
Select Window => Show Stages.
  
Now see what happens when you change th value coming ut of the osc listener.  Imagine the possibilities of realtime video!
+
Now see what happens when you change the value coming out of the osc listener.  Imagine the possibilities of realtime video!
  
 
[[Image:Isadora.jpg]]
 
[[Image:Isadora.jpg]]
  
=Use Policies=
+
 
Make sure to turn of monitors, log out, and leave the room clean.  Users with the room reserved ahead of time have preference to those who do not.
+
 
 +
.
  
 
=Troubleshooting Sound=
 
=Troubleshooting Sound=
Line 100: Line 154:
 
Mac => System Preferences => Sound
 
Mac => System Preferences => Sound
 
Make sure that HSDPe AIO (Slot-3) is selected for Output and Input
 
Make sure that HSDPe AIO (Slot-3) is selected for Output and Input
 +
 +
[[Image:Sound.jpg]]
  
 
Now open Applications => HDSP Mixer.  Click “View” => “Matrix”  It should look like this:
 
Now open Applications => HDSP Mixer.  Click “View” => “Matrix”  It should look like this:
 +
 +
[[Image:Matrix.jpg]]
  
 
Make certain that A1 and A2 are selected for Out1 and Out2.
 
Make certain that A1 and A2 are selected for Out1 and Out2.
You should see the meters going now.  Sound is 100% going out of the mac now. If you don’t see any info in the meters, check that the volume of your source program isn’t mute or something.  Now raise channels 17 and 18 on the Yamaha, along with the master.  Got It? Great.  If not, continue.....
+
You should see the meters going now.  If you can see the meters going with the matrix routed correctly, sound is definitely going to the yamaha.  
 +
 
 +
[[Image:DSPMixer.jpg]]
 +
 
 +
If you don’t see any info in the meters, check that the volume of your source program isn’t mute or something.  Now raise channels 17 and 18 (sliders 1 and 2 with Layer '''17-32''' selected) on the Yamaha, along with the master.  Got It? Great.  If not, continue...
  
 
==Check the Mixer:==
 
==Check the Mixer:==
 
Now make sure that the settings on the YAMAHAA DM1000 mixer are correct:
 
Now make sure that the settings on the YAMAHAA DM1000 mixer are correct:
  
Load Scene 05 MAC PRO PLAYBACK.
+
Press the “Scene” Button on the bottom right of the Desplay Access set of buttons.  From there make sure that “5 MAC PRO PLAYBACK” is selected.  Use the scroll wheel to select this preset, and either press “enter” near the scroll wheel, or “recall” in the “scene memory” section in the bottom right corner near the screen.
 +
 
 +
'''WARNING:''' '''PLEASE DO NOT WRITE OVER ANY OF THE EXISTING PRESETS OR THEIR CORRESPONDING INPUT/OUTPUT PATCHES.''' Unfortunately, it is easy to hit 'Store' or 'Erase' rather than 'Recall' when recalling a preset from the library. While presets can be locked, the input/output patches to which they refer cannot.  
  
Select “Input Patch” from the Display Access Area.
+
Select “Input Patch” from the Diamond Display Control buttons.
 
Make sure the selected tab is “In Patch”.  Double check that on the display,  
 
Make sure the selected tab is “In Patch”.  Double check that on the display,  
 
the boxes below channels 17 and 18 are routing to S1-1 and S1-2 respectively.
 
the boxes below channels 17 and 18 are routing to S1-1 and S1-2 respectively.
Line 117: Line 181:
 
Select “Output Patch” from the Display Access Area. Select the Omni Out tab.  Make sure that “Omni 1” and “Omni 2” are selected to “Bus 2” and “Bus 1” Respectively.  (Inverted...solves the stereo issue).
 
Select “Output Patch” from the Display Access Area. Select the Omni Out tab.  Make sure that “Omni 1” and “Omni 2” are selected to “Bus 2” and “Bus 1” Respectively.  (Inverted...solves the stereo issue).
  
Now try selecting Layer 17-32 and raising sliders one and two, you should get sound.  If you are still struggling, please find Jay Kadis or Sandy Greenfield to help.
+
Now try selecting Layer 17-32 and raising sliders one and two, and you definitely should get sound.  If you are still struggling, have a look at the meter button.  You should be able to see if channels 17-18 are receiving any information at all.  If not, then go back and check things with the computer.  If you continue to struggle, please don't disconnect any cables.  Find Jay Kadis or Sandy Greenfield to help.
  
 
=Troubleshooting Visuals=
 
=Troubleshooting Visuals=
 
Screens not working?  Go to Preferences => Displays.  Click “Gather Displays”.  You should get three windows together.  Click Arrangement.  Make sure “Mirror Displays” is deselected.
 
Screens not working?  Go to Preferences => Displays.  Click “Gather Displays”.  You should get three windows together.  Click Arrangement.  Make sure “Mirror Displays” is deselected.
  
If you don’t see three Boxes right near each other, click “display” and click “Detect Displays”. This should resolve any issues.
+
[[Image:Picture_5.jpg]]
 +
 
 +
If you don’t see three Boxes right near each other, click “display” and click “Detect Displays”. This should resolve any issues.
  
 
'''Note:''' In particular for video editing, the Samsung needs to be calibrated.  Select “Color” on the samsung preferences, and make sure that the preset “samsung calibrated” is selected.  Alternatively, you can calibrate your own version...try to make it look as close to the Cinema HD display as possible.
 
'''Note:''' In particular for video editing, the Samsung needs to be calibrated.  Select “Color” on the samsung preferences, and make sure that the preset “samsung calibrated” is selected.  Alternatively, you can calibrate your own version...try to make it look as close to the Cinema HD display as possible.
 +
 +
 +
=Use Policies=
 +
Make sure to turn off monitors, log out, and leave the room clean. 
 +
 +
Users with the room reserved ahead of time have preference to those who do not.
 +
 +
Any questions please contact Michael Zeligs, mzeligs@stanford.edu

Latest revision as of 15:10, 7 October 2015

Studio C: Getting Started

Welcome to the Intermedia Performance Lab, CCRMA's mothership of audio and visual design. This guide is designed to familiarize you with how to effectively use this studio.

AUGUST 2015 USER GUIDES AND INSTRUCTIONS Studio C Guides


Sound

Start by getting any kind of a audio signal playing from the mac. All audio signals from the Macintosh are routed into the the Yamaha DM1000 digital mixer via an optical line out card. You will need to make sure system preferences on the mac are set to the right output, and also that the mixer has the right settings.

Now look at the mixer. First try.

The Layer Selector: On the right side of the mixer, just below the scroll wheel, selects which channels the 16 sliders act upon.

In our case we want to select Layer 17-32.

Now raise the first two channel sliders on the far left of the console, as well as the master level. Hopefully you are getting sound right away. If not, read on.

9blah.jpg


The Diamond-shaped buttons allow you to navigate different display screens. Each time you press the button a different menu screen will be diplayed. A few useful buttons are:

'METER': allows you to view input signals across the mixer

'SCENE': allows you to store and recall presets

'INPUT/OUTPUT PATCH': allows you to determine where signals flow to and from.

Press the “Scene” Button on the bottom right of the Desplay Access set of buttons. From there make sure that “5 MAC PRO PLAYBACK” is selected. Use the scroll wheel to select this preset, and either press “enter” near the scroll wheel, or “recall” in the “scene memory” section in the bottom right corner near the screen.


10blah.jpg

Repeat selecting Layer 17-32. And raising the first two channel sliders on the far left of the console, as well as the master level.

You should now be hearing sound. If not, please refer to “Troubleshooting Sound”.

Visuals:

The MacPro in Studio C has two displays for your use in addition to the main screen.

Samsung.jpg

To activate the Samsung Flatscreen, use the Remote Control on the desk to power it up. This display is really good for video editing. It should automatically load when powered on. If not, refer to visuals troubleshooting.

Wacom.jpg

The Wacom Tablet. Power on using the button on top of the screen. This screen Is a touchscreen table for use with the associate pen. This is really useful for repetictive tasks, like drawing patches in isadora. It too should automatically load as a display.

As a default, tapping with the pen is a click, holding the pen to the surface is dragging. The two buttons on the pen act as double click and right-click, recpectively.

To edit functionality for the pen, visit Apple Preferences => “Wacom Tablet”

If either of these are not working, please refer to “Toubleshooting Visuals”.

Make sure to power off the displays before leaving the room.

Note: Sometimes, when the displays are off, the computer will still recognize them as operational, and it will allow the mouse to move thorugh to them. This can result in “losing the mouse”. There is nothing in the bottom left of the main screen, so drag the mouse down and to the left to try to find it again.


.

Software

The Studio C bundle is different than the rest of CCRMA in that it offers several additional options for video and audio production.

Adobe Suite. Includes:

Photoshop, Illustrator, and InDesign (Image and Layout editing tools)

Flash (Animation, interactive web)

Fireworks, Dreamweaver (Web Design)

After Effects. (Special effects, video, animation)


ArtMatic Voyager (3D Rendering and Animation Suite)


Final Cut Studio Includes:

Final Cut Pro (Industry standard video editor. Useful for large projects)

Motion (State of the art special effects / animation tool)

Color (Color and special effect mastering suite for video)

DVD Studio Pro

Compressor (Easily create batch conversions of video files to any format)

Sountrack Pro (Easily link final cut projects for audio mastering/mixing)


Isadora (Realtime video processor, utilizing object-oriented programming. Exceptionally stable and very simply and powerful to learn. Fully customizable inputs/outputs)

Logic Pro (Mac’s top of the line audio tracking software)

Max / MSP / Jitter (Realtime audio and video processor, utilizing object-oriented programming. Fully customizable inputs/outputs. Very cool)

MetaSynth (Fully customizable tour through virtual synth land, utilizaing architecture as a way to craft sounds)

Sibelieus (Notation and MIDI Software)

Snaps Pro (Powerful screen capture tool)


.

Making the Software Work

Final Cut: If final cut is quitting before loading, you need to trash your user preferences.

Go to Finder => /MY_username => Library => Preferences

There are 4 files you need to delete: 1) com.apple.FinalCut.plist 2) Final Cut Pro User Data => Final cut prefs, prefs, obj cache, prof cache. Delete all of them. Don't Worry

Empty the trash, and the program should now open. (this has something to do with networked user preferences).

Setting Scratch Discs: Make sure to select where you will be writing your captured video and renderings to. File => System Settings.


Isadora: Isadora is a fantastically stable method for creating real-time interactive video projects. It accepts MIDI, OSC, and Serial, as well as running machine-vision and blob detection.

Quick Tutorial:

Introduce several object on the canvas: Movie player, explode, OSC listener, and projector. Select File => Import media. Select a movie file, set horz size and vert size on the explode object to five.

Select Window => Show Stages.

Now see what happens when you change the value coming out of the osc listener. Imagine the possibilities of realtime video!

Isadora.jpg


.

Troubleshooting Sound

Okay, so you're not getting sound yet. Lets get into the nitty gritty.

Start with the Computer:

Mac => System Preferences => Sound Make sure that HSDPe AIO (Slot-3) is selected for Output and Input

Sound.jpg

Now open Applications => HDSP Mixer. Click “View” => “Matrix” It should look like this:

Matrix.jpg

Make certain that A1 and A2 are selected for Out1 and Out2. You should see the meters going now. If you can see the meters going with the matrix routed correctly, sound is definitely going to the yamaha.

DSPMixer.jpg

If you don’t see any info in the meters, check that the volume of your source program isn’t mute or something. Now raise channels 17 and 18 (sliders 1 and 2 with Layer 17-32 selected) on the Yamaha, along with the master. Got It? Great. If not, continue...

Check the Mixer:

Now make sure that the settings on the YAMAHAA DM1000 mixer are correct:

Press the “Scene” Button on the bottom right of the Desplay Access set of buttons. From there make sure that “5 MAC PRO PLAYBACK” is selected. Use the scroll wheel to select this preset, and either press “enter” near the scroll wheel, or “recall” in the “scene memory” section in the bottom right corner near the screen.

WARNING: PLEASE DO NOT WRITE OVER ANY OF THE EXISTING PRESETS OR THEIR CORRESPONDING INPUT/OUTPUT PATCHES. Unfortunately, it is easy to hit 'Store' or 'Erase' rather than 'Recall' when recalling a preset from the library. While presets can be locked, the input/output patches to which they refer cannot.

Select “Input Patch” from the Diamond Display Control buttons. Make sure the selected tab is “In Patch”. Double check that on the display, the boxes below channels 17 and 18 are routing to S1-1 and S1-2 respectively.

Select “Output Patch” from the Display Access Area. Select the Omni Out tab. Make sure that “Omni 1” and “Omni 2” are selected to “Bus 2” and “Bus 1” Respectively. (Inverted...solves the stereo issue).

Now try selecting Layer 17-32 and raising sliders one and two, and you definitely should get sound. If you are still struggling, have a look at the meter button. You should be able to see if channels 17-18 are receiving any information at all. If not, then go back and check things with the computer. If you continue to struggle, please don't disconnect any cables. Find Jay Kadis or Sandy Greenfield to help.

Troubleshooting Visuals

Screens not working? Go to Preferences => Displays. Click “Gather Displays”. You should get three windows together. Click Arrangement. Make sure “Mirror Displays” is deselected.

Picture 5.jpg

If you don’t see three Boxes right near each other, click “display” and click “Detect Displays”. This should resolve any issues.

Note: In particular for video editing, the Samsung needs to be calibrated. Select “Color” on the samsung preferences, and make sure that the preset “samsung calibrated” is selected. Alternatively, you can calibrate your own version...try to make it look as close to the Cinema HD display as possible.


Use Policies

Make sure to turn off monitors, log out, and leave the room clean.

Users with the room reserved ahead of time have preference to those who do not.

Any questions please contact Michael Zeligs, mzeligs@stanford.edu