Difference between revisions of "CCRMA Comet How To Connect"

From CCRMA Wiki
Jump to: navigation, search
(Created page with 'How To Connect On this page, we explain how to connect to Satellite CCRMA over the Ethernet cable. [edit] Mac OS X If you are using Mac OS 10.6.3 through 10.8, you need to inst…')
 
Line 1: Line 1:
How To Connect
+
== How To Connect ==
  
 
On this page, we explain how to connect to Satellite CCRMA over the Ethernet cable.
 
On this page, we explain how to connect to Satellite CCRMA over the Ethernet cable.
[edit] Mac OS X
 
  
If you are using Mac OS 10.6.3 through 10.8, you need to install XQuartz so that XWindows will work. (Prior versions (10.5+) have XWindows installed by default in the OS X Developer Tools, but if it is missing for you then first try downloading X11 from the same link.)
+
== Mac OS X ==
Go to System Preferences, select Network, and choose the Ethernet module. Write down your current settings in case you think that you might need them in the future. (For example, if you use Ethernet to connect to the Internet in your dormitory, you probably want to save these settings for when you go home.) Now change your Ethernet settings to the following:
+
 
 +
If you are using Mac OS 10.6.3 through 10.8, you need to install [http://www.macupdate.com/app/mac/26593/xquartz XQuartz] so that XWindows will work. (Prior versions (10.5+) have XWindows installed by default in the OS X Developer Tools, but if it is missing for you then first try downloading X11 from the same link.)
 +
 
 +
Go to ''System Preferences'', select ''Network'', and choose the ''Ethernet'' module. Write down your current settings in case you think that you might need them in the future. (For example, if you use Ethernet to connect to the Internet in your dormitory, you probably want to save these settings for when you go home.) Now change your Ethernet settings to the following:
 +
 
 
Configure: Manually
 
Configure: Manually
 +
 
IP Address: 192.168.105.105
 
IP Address: 192.168.105.105
 +
 
Subnet Mask: 255.255.255.0
 
Subnet Mask: 255.255.255.0
The remaining items such as Router, DNS Server, and Search Domains can be left blank for now, and click the Apply button in the bottom right to apply the settings.
 
  
You will use the Terminal program to login to Satellite CCRMA over the Ethernet connection.
+
The remaining items such as ''Router, DNS Server,'' and ''Search Domains'' can be left blank for now, and click the ''Apply'' button in the bottom right to apply the settings.
Now open up a window in Terminal. Your Satellite CCRMA kit should choose the IP address 192.168.105.106. To check that it is visible type the command ping 192.168.105.106, and see how fast the network response is. Once you are satisfied, hit Control-C to quit ping. Then, to finally login to Satellite CCRMA, type
+
ssh -XY ccrma@192.168.105.106
+
The password should be temppwd.
+
[edit] Windows 7
+
  
Windows 7 users should follow this link
+
<!-- If your laptop is currently connected to the Internet using some method other than Ethernet: It can be convenient to enable your kit to get onto the Internet. '''Internet Sharing will not work on Mac OS X 10.7 (Lion) or Mac OS X 10.8 (Mountain Lion)''', so skip this step on those systems. Go back to ''System Preferences'' and choose ''Sharing''. Edit the settings so that your Internet connection is shared with the Ethernet port. In order to do this, you may have to disable ''Internet Sharing'' temporarily. Finally, click the ''Internet Sharing'' checkbox to enable this option. -->
[edit] Linux
+
 
 +
You will use the Terminal program to login to Satellite CCRMA over the Ethernet connection.
 +
 
 +
Now open up a window in Terminal. Your Satellite CCRMA kit should choose the IP address 192.168.105.106. To check that it is visible type the command ''ping 192.168.105.106'', and see how fast the network response is. Once you are satisfied, hit Control-C to quit ''ping''. Then, to finally login to Satellite CCRMA, type
 +
 
 +
''ssh -XY ccrma@192.168.105.106''
 +
 
 +
The password should be ''temppwd''.
 +
 
 +
== Windows 7 ==
 +
Windows 7 users should follow [https://ccrma.stanford.edu/wiki/Satellite_CCRMA_Windows this link]
 +
 
 +
== Linux ==
  
 
Instructions for Ubuntu 10.04 Netbook Remix:
 
Instructions for Ubuntu 10.04 Netbook Remix:
Run ifconfig in a terminal and look for your wired ethernet device. It will probably be called "eth0". Copy down the value next to HWaddr.
+
 
 +
Run ifconfig in a terminal and look for your wired ethernet device. It will probably be called "eth0". Copy down the value next to HWaddr.
 +
 
 
Go to "System" -> "Network Connections".
 
Go to "System" -> "Network Connections".
 +
 
Under the "Wired" tab of the dialog that opens click "Add".
 
Under the "Wired" tab of the dialog that opens click "Add".
Set the "Connection name" to something logical, like CCRMA Satellite. Paste the value you copied from HWAddress in the "MAC address" box.
+
 
Click the "IPv4 Settings" tab. Change "Method" to "Manual". Next to "Addresses" click "Add". In the "Address" column type "192.168.105.105". In the "Netmask" column type "255.255.255.0". Click "Apply".
+
Set the "Connection name" to something logical, like CCRMA Satellite. Paste the value you copied from HWAddress in the "MAC address" box.
In the notification area on your desktop panel, click the NetworkManager Applet icon. Select the connection you just created. You now should be able to ssh into the board by typing ssh -XY ccrma@192.168.105.106 in a terminal. The password is temppwd
+
 
 +
Click the "IPv4 Settings" tab. Change "Method" to "Manual". Next to "Addresses" click "Add". In the "Address" column type "192.168.105.105". In the "Netmask" column type "255.255.255.0". Click "Apply".
 +
 
 +
In the notification area on your desktop panel, click the NetworkManager Applet icon. Select the connection you just created. You now should be able to ssh into the board by typing ''ssh -XY ccrma@192.168.105.106'' in a terminal. The password is ''temppwd''
 +
 
 +
<!-- For internet connection sharing, this link might help (I haven't tried it yet):  https://help.ubuntu.com/community/Internet/ConnectionSharing -->
 +
 
 +
<center>[[250a 2009]]</center>
 +
[[Category:Satellite CCRMA]][[Category:PID]][[Category:NMC 2011]]

Revision as of 02:04, 4 October 2013

How To Connect

On this page, we explain how to connect to Satellite CCRMA over the Ethernet cable.

Mac OS X

If you are using Mac OS 10.6.3 through 10.8, you need to install XQuartz so that XWindows will work. (Prior versions (10.5+) have XWindows installed by default in the OS X Developer Tools, but if it is missing for you then first try downloading X11 from the same link.)

Go to System Preferences, select Network, and choose the Ethernet module. Write down your current settings in case you think that you might need them in the future. (For example, if you use Ethernet to connect to the Internet in your dormitory, you probably want to save these settings for when you go home.) Now change your Ethernet settings to the following:

Configure: Manually

IP Address: 192.168.105.105

Subnet Mask: 255.255.255.0

The remaining items such as Router, DNS Server, and Search Domains can be left blank for now, and click the Apply button in the bottom right to apply the settings.


You will use the Terminal program to login to Satellite CCRMA over the Ethernet connection.

Now open up a window in Terminal. Your Satellite CCRMA kit should choose the IP address 192.168.105.106. To check that it is visible type the command ping 192.168.105.106, and see how fast the network response is. Once you are satisfied, hit Control-C to quit ping. Then, to finally login to Satellite CCRMA, type

ssh -XY ccrma@192.168.105.106

The password should be temppwd.

Windows 7

Windows 7 users should follow this link

Linux

Instructions for Ubuntu 10.04 Netbook Remix:

Run ifconfig in a terminal and look for your wired ethernet device. It will probably be called "eth0". Copy down the value next to HWaddr.

Go to "System" -> "Network Connections".

Under the "Wired" tab of the dialog that opens click "Add".

Set the "Connection name" to something logical, like CCRMA Satellite. Paste the value you copied from HWAddress in the "MAC address" box.

Click the "IPv4 Settings" tab. Change "Method" to "Manual". Next to "Addresses" click "Add". In the "Address" column type "192.168.105.105". In the "Netmask" column type "255.255.255.0". Click "Apply".

In the notification area on your desktop panel, click the NetworkManager Applet icon. Select the connection you just created. You now should be able to ssh into the board by typing ssh -XY ccrma@192.168.105.106 in a terminal. The password is temppwd


250a 2009