CCRMA Comet How To Connect

From CCRMA Wiki

(Difference between revisions)
Jump to: navigation, search
m (Added link to tildesoft for downloading Bonjour Browser)
m (Actually make the tildesoft link work)
Line 8: Line 8:
<!-- If your laptop is currently connected to the Internet using some method other than Ethernet: It can be convenient to enable your kit to get onto the Internet.  Go to ''System Preferences'' and choose ''Sharing''. Edit the settings so that your Internet connection is shared with the Ethernet port. In order to do this, you may have to disable ''Internet Sharing'' temporarily. Finally, click the ''Internet Sharing'' checkbox to enable this option. -->
<!-- If your laptop is currently connected to the Internet using some method other than Ethernet: It can be convenient to enable your kit to get onto the Internet.  Go to ''System Preferences'' and choose ''Sharing''. Edit the settings so that your Internet connection is shared with the Ethernet port. In order to do this, you may have to disable ''Internet Sharing'' temporarily. Finally, click the ''Internet Sharing'' checkbox to enable this option. -->
-
Now for your computer to be able to access your Raspberry Pi, install "Bonjour Browser" for Mac (download from [tildesoft.com]) and open it. Now disconnect the Ethernet cable from your Mac. Go to System Preferences -> Sharing and click on the "Internet Sharing" submenu. For "To computers using," check Ethernet. Be sure to check the Internet Sharing box on the left. Last, reconnect the Ethernet cable -- now the steps below should work!
+
Now for your computer to be able to access your Raspberry Pi, install "Bonjour Browser" for Mac (download from [http://www.tildesoft.com tildesoft.com]) and open it. Now disconnect the Ethernet cable from your Mac. Go to System Preferences -> Sharing and click on the "Internet Sharing" submenu. For "To computers using," check Ethernet. Be sure to check the Internet Sharing box on the left. Last, reconnect the Ethernet cable -- now the steps below should work!
You will use the Terminal program to login to Satellite CCRMA over the Ethernet connection.  
You will use the Terminal program to login to Satellite CCRMA over the Ethernet connection.  

Revision as of 10:35, 4 October 2013

Contents

How To Connect

On this page, we explain how to connect to Satellite CCRMA over the Ethernet cable.

Mac OS X

If you are using Mac OS 10.6.3 through 10.8, you need to install XQuartz so that XWindows will work. (Prior versions (10.5+) have XWindows installed by default in the OS X Developer Tools, but if it is missing for you then first try downloading X11 from the same link.)

Now for your computer to be able to access your Raspberry Pi, install "Bonjour Browser" for Mac (download from tildesoft.com) and open it. Now disconnect the Ethernet cable from your Mac. Go to System Preferences -> Sharing and click on the "Internet Sharing" submenu. For "To computers using," check Ethernet. Be sure to check the Internet Sharing box on the left. Last, reconnect the Ethernet cable -- now the steps below should work!

You will use the Terminal program to login to Satellite CCRMA over the Ethernet connection.

Now open up a window in Terminal. Your ccrma comet can be resolved via the hostname "satellite.local". To check that it is visible type the command ping satellite.local, and see how fast the network response is. Once you are satisfied, hit Control-C to quit ping. Then, to finally login to Satellite CCRMA, type

ssh -XY ccrma@satellite.local

The password should be temppwd.

Linux

First install avahi-daemon to resolve ip via zeroconf.

  • sudo apt-get install avahi-daemon (for debian distros

You can now connect from the terminal with ssh

  • ssh -XY ccrma@satellite.local

Windows 7

  • Then Download XMING and install it. Then start the Xming program from the Start Menu--it is in a folder called Xming. (I believe that it is not necessary to start the XLaunch program -- hopefully someone can confirm this during the next workshop.)
  • Then download Putty. It will stay in your Downloads folder unless you put it somewhere else, such as the Desktop.
    • Go to the Connection | SSH | X11 panel and check "Enable X11 forwarding"
      Image:PuttyX11.png
    • Go to the Connection | SSH | Tunnels panel and check "Local ports accept connections from other hosts"
      Image:PuttyTunnels.png
    • Go to the Session panel and enter ccrma@satellite.local into the "Host name" field to specify that you want to log in to satellite.local (the IP address of CCRMA comet) using the user name ccrma.
      Image:PuttySession.png
    • Select "Default Settings" and then click the "Save" button so that all these settings are saved by default.
    • Finally click on the "Open" button to open the connection.
    • The password is temppwd
    • Since a default pd patch started on boot, you can stop it by typing stop-default
    • Then run the command
      pd &
      to make sure that pd can successfully forward its Window to your laptop.
250a 2009
Personal tools