Difference between revisions of "220a-spring-2021/hw3"

From CCRMA Wiki
Jump to: navigation, search
(Homework #3: Composing with Perception)
(Part 3: The Art of Building Expectation: The Drop(s))
Line 40: Line 40:
  
  
=== Part 3: The Art of Building Expectation: The Drop(s) ===
+
=== Part 3: The Art of Building Expectation: Oh The Drops ===
 
At some level, one might [https://mitpress.mit.edu/books/sweet-anticipation say] that music is all about building expectations—and then resolving and/or artfully subverting them. This shaping of expectations, of course, can be achieved in many different ways.  One approach is through the use of contrast: by paying attention to and playing with both what is present and what is not.  Example: if a section of music consists of only mid-range and higher frequencies, the introduction of low frequencies can feel surprising yet intentional (and even “inevitable”), satisfying, and purposive (i.e., a sense that something belongs, or a sense that it serves a function even when it doesn’t in practice—which, if one thinks about it, could be said of music?  BTW for those wanting to think really hard about this idea, check out [https://plato.stanford.edu/entries/kant-aesthetics/#3.1 Immanuel Kant’s notion of Purposiveness]).  This idea of playing with contrast to shape expectation can employ setting up variations in frequency, time, dynamics, harmony, timbre, texture—anything that you can control (which, with computer music, is everything).  In music, especially in EDM, there is the concept of [https://en.wikipedia.org/wiki/Drop_(music) The Drop], which uses a few of these variations to build a [https://www.youtube.com/watch?v=XCawU6BE8P8 sometimes over-the-top]  sense of anticipation and tension, leading up to an emphatic resolution.  In this part of the assignment, we are to create a few different kinds of musical “drops”.
 
At some level, one might [https://mitpress.mit.edu/books/sweet-anticipation say] that music is all about building expectations—and then resolving and/or artfully subverting them. This shaping of expectations, of course, can be achieved in many different ways.  One approach is through the use of contrast: by paying attention to and playing with both what is present and what is not.  Example: if a section of music consists of only mid-range and higher frequencies, the introduction of low frequencies can feel surprising yet intentional (and even “inevitable”), satisfying, and purposive (i.e., a sense that something belongs, or a sense that it serves a function even when it doesn’t in practice—which, if one thinks about it, could be said of music?  BTW for those wanting to think really hard about this idea, check out [https://plato.stanford.edu/entries/kant-aesthetics/#3.1 Immanuel Kant’s notion of Purposiveness]).  This idea of playing with contrast to shape expectation can employ setting up variations in frequency, time, dynamics, harmony, timbre, texture—anything that you can control (which, with computer music, is everything).  In music, especially in EDM, there is the concept of [https://en.wikipedia.org/wiki/Drop_(music) The Drop], which uses a few of these variations to build a [https://www.youtube.com/watch?v=XCawU6BE8P8 sometimes over-the-top]  sense of anticipation and tension, leading up to an emphatic resolution.  In this part of the assignment, we are to create a few different kinds of musical “drops”.
  
Line 48: Line 48:
 
(3c-time.ck) next, create a temporal-based “drop”. Feel free to explore rhythmic build-ups, dramatic pauses, [https://people.carleton.edu/~jlondon “metric fake outs”], or other “drops”.  By the way, in the same Britney Spears “drop” above, note the brief pause in time right before the drop, creating a sense of suspended time, before everything comes back to life.
 
(3c-time.ck) next, create a temporal-based “drop”. Feel free to explore rhythmic build-ups, dramatic pauses, [https://people.carleton.edu/~jlondon “metric fake outs”], or other “drops”.  By the way, in the same Britney Spears “drop” above, note the brief pause in time right before the drop, creating a sense of suspended time, before everything comes back to life.
 
(3d-the-drop.ck) Alrighty, now it’s time to make your own “drop” in the form of a miniature musical statement (20-30 seconds).  It is to consist of a setup and a resolution, taking into account and possibly combining some of what you’ve worked with so far.  For example, what if you made an EDM-esque drop with a Shepard Tone buildup (which can literally go forever)?  Remember, your drop can be as over-the-top or as subtle as you’d like, but try to be intentional in your choices.  You may assemble the final statement either fully in ChucK or by using a DAW to arrange materials created in ChucK. Turn in both your ChucK code and a recording of your drop.
 
(3d-the-drop.ck) Alrighty, now it’s time to make your own “drop” in the form of a miniature musical statement (20-30 seconds).  It is to consist of a setup and a resolution, taking into account and possibly combining some of what you’ve worked with so far.  For example, what if you made an EDM-esque drop with a Shepard Tone buildup (which can literally go forever)?  Remember, your drop can be as over-the-top or as subtle as you’d like, but try to be intentional in your choices.  You may assemble the final statement either fully in ChucK or by using a DAW to arrange materials created in ChucK. Turn in both your ChucK code and a recording of your drop.
 
  
 
=== 4. Musical Statement ===
 
=== 4. Musical Statement ===

Revision as of 14:49, 28 April 2021

Homework #3: Composing with Perception

a hand-drawn sketch of a unsettling scene of music synthesis

Due Date

  • milestone: 2021.5.5 (in-class) Wednesday
  • final deliverables due: 2021.5.10, 11:59pm Tuesday
  • in-class listening: 2021.5.12, Wednesday

In this homework, you are to experiment (and have fun) with various auditory perceptual phenomena, understand how to induce their effects in listeners, and explore their use in a creative context. Parts 1-3 of the homework examine, respectively, 1) auditory stream segregation, 2) Shepard tones, and 3) the art of building/shaping expectation through sound. Part 4 asks you to create a musical statement that makes musical use of two or more perceptual phenomena (either from this homework or as discussed in class).

Part 1: Auditory Streaming

Auditory stream segregation (and fusion) pertains to how a listener perceives a sequence or a mixture of sounds, grouping them into meaningful subsets (e.g., “melody”, “voice”, etc.) that can be called “streams”.

For instance, depending on how a monophonic sequence of notes are presented—with considerations to pitch, tempo, timbre, loudness—it is possible to suggest different groupings over time. In class we listened to J. S. Bach’s Partita No. 3 in E Major (Prelude), where a single monophonic violin voice alternates between increasingly large pitch intervals. When played rapidly enough, the overall effect can begin to sound like two (or even three) separate streams, even though the violin never articulates more than one note at any given time. This would be an example of auditory streaming, induced by control of pitch (e.g., taking into account the our tendency to group high notes together), tempo (i.e., we begin to perceive more than one stream when it is played sufficiently fast), and even timbre and loudness (as a consequence of large pitch intervals; the higher notes can sound brighter and louder.). Other examples of auditory streaming induced by control of pitch can be found in a variety of musical genres and contexts. For example, listen to this Charles Mingus bass solo, which begins with a concerted effort to create high and low pitch regions (or “streams”) by jumping between strings/registers quite often. Jazz bassists and other experienced improvisers often employ this idea of pitch-based stream separation while crafting musical lines.

While the previous examples primarily employed pitch variations, It is also possible to induce auditory stream segregation by intentionally varying the timbre and tempo. In this ChucK example, a simple 4-note ascending sequence is played increasingly faster and against a cycle of 3 different timbres. The end result includes a stream that sounds like a slower descending sequence. [stream-timbre.ck]

Now, it’s our turn to play with this: Begin by creating a monophonic repeating sequence of notes. (Here is some starter code, which simply plays a melodic sequence; please feel free to build on this or experiment with different sequences). You don’t turn in anything for this step. (1a-tempo.ck) Vary smoothly between two tempi: one slower, in which you perceive the sequence a single stream, and the other faster, so it’s perceivable as two (or more) streams. Feel free to try this with different note sequences (e.g., make them alternate between larger/smaller intervals; or try alternating between 2-, 3-, and 4- notes) and observe the extent it strengthens or weakens the streaming “effect”. (1b-velocity-timbre.ck) Next, create a new note sequence. This time, play with giving special attention to note loudness (“velocity”) and timbre (e.g., using different filter cutoffs, envelope settings, oscillators, STK instruments, or other UGens), to strengthen the perception of more than one stream. (1c-etude.ck) Create a miniature musical statement (15-30 seconds) using this idea. Turn in both the ChucK file(s) and the wave file for your mini-musical statement. You may assemble the final statement either fully in ChucK or by using a DAW (Audacity, Reaper, Logic, etc.) to arrange materials created in ChucK.


Part 2: Shepard Tones

A Shepard Tone is constructed by adding sine waves at octave frequency intervals, with amplitudes weighted under a bell-shaped curve. By moving all the sine wave frequencies up or down (while still respecting the amplitude curve), it is possible to create the auditory illusion of an endlessly rising or falling scale / tone.

There are numerous examples of Shepard tones used in film and music, especially to create moments of tension, suspense, etc. This video briefly describes Shepard tones and highlights some of these examples.

Start with shepard.ck, a basic Shepard Tone program in ChucK In MiniAudicle, you can find this file if you go to File > Open Example > deep > shepard.ck Run and listen to shepard.ck Play with the Shepard Tone in the following ways: Change the direction from a falling tone to a rising tone (hint: it’s one number in this implementation) Change the speed (hint: it’s the same number) Create a chord by stacking three Shepard Tones together — this is less trivial and will require some refactoring of this code. Make it so that the Shepard Tone chord can “stop and go” on demand (i.e., momentarily pause the change of frequencies) Create a miniature musical statement (15-30 seconds) that incorporates Shepard Tones in a substantial way; consider using shepard tones, shepard chords, amplitude-enveloped shepard tones or chords, or the stop-and-go control of Shepard chords; free feel to mix Shepard Tones with non-Shepard Tone elements (like percussion or synths). You may assemble the final statement either fully in ChucK or by using a DAW to arrange materials created in ChucK.


Part 3: The Art of Building Expectation: Oh The Drops

At some level, one might say that music is all about building expectations—and then resolving and/or artfully subverting them. This shaping of expectations, of course, can be achieved in many different ways. One approach is through the use of contrast: by paying attention to and playing with both what is present and what is not. Example: if a section of music consists of only mid-range and higher frequencies, the introduction of low frequencies can feel surprising yet intentional (and even “inevitable”), satisfying, and purposive (i.e., a sense that something belongs, or a sense that it serves a function even when it doesn’t in practice—which, if one thinks about it, could be said of music? BTW for those wanting to think really hard about this idea, check out Immanuel Kant’s notion of Purposiveness). This idea of playing with contrast to shape expectation can employ setting up variations in frequency, time, dynamics, harmony, timbre, texture—anything that you can control (which, with computer music, is everything). In music, especially in EDM, there is the concept of The Drop, which uses a few of these variations to build a sometimes over-the-top sense of anticipation and tension, leading up to an emphatic resolution. In this part of the assignment, we are to create a few different kinds of musical “drops”.

Gather two of three of your favorite “drops” (in EDM or any other forms of music), listen to them critically, reflect, and comment on what makes them effective as a “drop”. Make use of English (and not ChucK) for this part. (3a-freq.ck) engineer a frequency-based “drop” moment by setting the expectations using frequencies during a “setup” phase, leading into a “resolution”. Example: there is nothing, by design, in the low register for a long time—followed by an introduction of low frequency elements, or vice versa.) A few questions: How will you set up “the drop”? Will you have a rise/falling train of frequencies? How will you introduce “the drop”? Suddenly? Gracefully? Gradually? Sneakily? ??? How might different approaches result in different perceived musical outcomes? (3b-timbre.ck) similarly to the above, engineer a timbre-based “drop”. We will leave this mostly to your imagination and design: attempt to create a moment where the “drop” comes in the form of a timbral shift (e.g., sound gets brighter or more muffled; or a new timbre is introduced, holding other elements the same). How will you prepare for and build to this “drop” so that it sounds intentional? For an example, a low pass filter is applied in Britney Spears’s “Until The World Ends”, starting around 3 minutes 05 seconds, curtailing the high frequencies; the sound gradually “brightens up”, until the drop where you are hit with a wide frequency spectrum (as if a window has been flung open to let in the sunlight). (3c-time.ck) next, create a temporal-based “drop”. Feel free to explore rhythmic build-ups, dramatic pauses, “metric fake outs”, or other “drops”. By the way, in the same Britney Spears “drop” above, note the brief pause in time right before the drop, creating a sense of suspended time, before everything comes back to life. (3d-the-drop.ck) Alrighty, now it’s time to make your own “drop” in the form of a miniature musical statement (20-30 seconds). It is to consist of a setup and a resolution, taking into account and possibly combining some of what you’ve worked with so far. For example, what if you made an EDM-esque drop with a Shepard Tone buildup (which can literally go forever)? Remember, your drop can be as over-the-top or as subtle as you’d like, but try to be intentional in your choices. You may assemble the final statement either fully in ChucK or by using a DAW to arrange materials created in ChucK. Turn in both your ChucK code and a recording of your drop.

4. Musical Statement

Create a musical statement (1-2 minutes) that makes use of at least two perceptual phenomena from Parts 1-3 and from class. In making use of the various phenomena in a creative context, Artful Design Principle 4.8 recommends “Experiment to ‘illogical extremes’ (and pull back according to taste)”, meaning in audiovisual programming you should freely experiment with the possibilities to know what is “too much” and then dialing things back to your taste. You may assemble the final statement either fully in ChucK or by using a DAW to arrange materials created in ChucK.


Milestone

  • For this milestone, we are primarily interested in a work-in-progress version of any of the musical statements—and that will be all you are expected to have on your website at this point. However, feel free to include anything on your webpage that's helpful to talk about your explorations and thinking for this milestone.
  • Please be prepared to share your work-in-progress and offer feedback to others in class on Wednesday (5/5)


Final Homework Deliverables

turn in all files by putting them in your 220a CCRMA webpage and submit ONLY your webpage URL to Canvas (in the form of https://ccrma.stanford.edu/~YOURID/220a/hw3"

Your hw3 webpage should include:

  • 1) ChucK (.ck) files, as applicable, for Parts 1 through 4
  • 2) sound (.wav) files, as applicable, for Parts 1 through 4
  • 3) comments and reflections as you work through the homework
  • 4) notes/title for you musical statement (Part 4)
  • 5) submit ONLY your webpage URL to Canvas