How To Get Satellite CCRMA

1. Get The Parts

• 4GB SD card or larger - get a high-quality one from a brand like Kingston

• One GT Max adjustable-length USB cable

• Ethernet cable

• 2.5A 5V switching power adaptor

• Arduino Nano

• Solderless breadboard

• Only if you have the Beagle Board original: External Ethernet/USB hub such as the GWC Technology HE2440

2. Burn Image to the SD Card

• Connect the blank SD card to your Mac by plugging it in or using a USB SDHC micro reader/writer.
• Open up the Terminal program, and find out which block device the (micro) SDHC card is connected to by running the df command. For instance, you might see it show up as something like /dev/disk3s1, meaning that the block device for the whole SDHC micro card is /dev/disk3. From now on, we will refer to that as diskXX.
• Unmount the block device by executing diskutil unmountDisk /dev/diskXX
• dd if=xM_RevC_Maverick.dd of=/dev/diskXX bs=8225280

If you have any difficulties: Try again, and or try changing the bs value to 10M or something else. This changes the block size of each write. Using a high-quality (micro) SDHC card can save you a lot of trouble later!