2. Terminal Debugging:

• Compile and load demo6 from the lab 2 code.
• If your computer has two serial cables attached to it (one black and one beige):

1. Plug the beige cable into the second serial connection on the AVRmini.

2. From a new terminal, run kermit2:

> kermit2

• If your computer has only one serial cable attached to it:

1. After you have loaded the demo program onto the AVR, unplug the serial cable and plug it into the other connector on the AVRmini (the one closest to the power switch).

2. From a new terminal, run kermit1:

> kermit1

3. Before you can load another program onto the AVRmini, you need to quit kermit by pressing Ctl-\ (control-backslash) and then q. You also need to switch the serial cable back to the programming port.